SMI30系列
本質安全型感測器
Extremely rugged and powerful opposed-mode intrinsically safe barrel sensors are designed for the most demanding hazardous area sensing applications.
- Sensor requires an approved intrinsic safety barrier and Banner MAXI-AMP model CI3RC2 current trip point amplifier
- Sensor is certified as intrinsically safe for use in all hazardous atmospheres as defined by Article 500 of the National Electrical Code, when used with approved "positive input" intrinsic safety barriers.
- Sensor is certified by Factory Mutual and CSA as non-incendive devices when used in Division 2 locations (except Groups E and F) without intrinsic safety barriers.
- 10 millisecond sensor pairs have a 140 m range 1 millisecond pairs have a 60 m range.
- Modulation frequency "A" is standard frequencies "B" and "C" are also available to minimize optical crosstalk from adjacent sensor pairs.
- 堅固設計和功能強大的對照式本安型圓柱式感測器，專為苛刻的危險區域感測應用而設計。
- 感測器需要防爆合格的本質安全，和Banner MAXI-AMP型CI3RC2電流保護放大器
- 感測器使用防爆本質安全，用於符合國家電氣規範第500條定義的所有危險環境，與經合格批准的「正輸入」本質安全屏障一起使用。
- 在Division 2場合(除了Groups E 及 F)使用時，感測器無需本質安全屏障下，經Factory Mutual和CSA認證為非易燃設備。
- 10毫秒感測器工作距離為140 m，1毫秒感測器的工作距離為60 m。
- 可調頻率「A」是標準頻率，「B」和「C」也可用於降低來自相鄰感測器的光干擾。
下載
技術文獻
-
SMI30AN6RYQ
SMI30 Series: Receiver - Frequency A
Range: 60 m; Input: 10-30 V dc
Output: Light Operate - I.S. Interface
3-pin Mini Integral QD -
SMI306EYQ
SMI30 Series: Emitter - Frequency A
Range: 60 m; Input: 10-30 V dc
Output: Not Applicable
3-pin Mini Integral QD -
SMI306EYCQ
SMI30 Series: Emitter - Frequency C
Range: 60 m; Input: 10-30 V dc
Output: Not Applicable
3-pin Mini Integral QD -
SMI30AN6RYCQ
SMI30 Series: Receiver-Frequency C
Range: 60 m; Input: 10-30 V dc
Output: Light Operate - I.S. Interface
3-pin Mini Integral QD -
SMI306EQ
SMI30 Series: Emitter - Frequency A
Range: 140 m; Input: 10-30 V dc
Output: Not Applicable
Mini 3-pin Integral QD -
SMI30AN6RQ
SMI30 Series: Receiver - Frequency A
Range: 140 m; Input: 10-30 V dc
Output: Light Operate - I.S. Interface
3-pin Mini Integral QD -
SMI30RN6RQ
SMI30 Series: Receiver - Frequency A
Range: 140 m; Input: 10-30 V dc
Output: Dark Operate - I.S. Interface
3-pin Mini Integral QD -
SMI306EBQ
SMI30 Series: Emitter - Frequency B
Range: 140 m; Input: 10-30 V dc
Output: Not Applicable
3-pin Mini Integral QD -
SMI306ECQ
SMI30 Series: Emitter - Frequency C
Range: 140 m; Input: 10-30 V dc
Output: Not Applicable
3-pin Mini Integral QD -
SMI30AN6RBQ
SMI30 Series: Receiver - Frequency B
Range: 140 m; Input: 10-30 V dc
Output: Light Operate - I.S. Interface
3-pin Mini Integral QD -
SMI30AN6RCQ
SMI30 Series: Receiver - Frequency C
Range: 140 m; Input: 10-30 V dc
Output: Light Operate - I.S. Interface
3-pin Mini Integral QD -
SMI30RN6RYQ
SMI30 Series: Receiver - Frequency A
Range: 60 m; Input: 10-30 V dc
Output: Dark Operate - I.S. Interface
3-pin Mini Integral QD -
SMI30RN6RBQ
SMI30 Series: Receiver - Frequency B
Range: 140 m; Input: 10-30 V dc
Output: Dark Operate - I.S. Interface
3-pin Mini Integral QD