• 返回

    • Lithium-Ion Battery Electrode Film: Roll-Diameter Measurement

    T30UX battery assembly

    Challenge: In EV battery manufacturing, electrode material comes in the form of a thin plastic film, which is supplied in large rolls. During the slitting and die-cutting process, rolls are monitored to detect jams or low-material. Electrode material presents challenging dark and reflective targets for traditional sensors, so choosing an accurate sensor that meets your specific application is critical.

    Solution: Banner offers several measurement sensors based on requirements such as sensing technology, accuracy, range, and output type.

    Lasers can offer the best accuracy and resolution but aren’t always an option if the material can’t be reliably detected due to its reflective properties. In these cases, an ultrasonic or radar sensor can be used. These technologies are unaffected by the target’s color or irregular surface qualities. In many cases, high-gain laser sensors are a good fit if accuracy is the most critical factor: Banner’s LM-series sensors have resolution down to 0.002 mm. Other laser sensors such as the LE-series have a longer sensing range (1m) while maintaining 1mm resolution.

     

    Banner sensors offer a variety of output types ranging from a basic, discrete signal (indicating that the electrode-material-film roll is above or below a certain diameter) to analog and even IO-Link outputs that provide real-time measurements.

     

    All sensor setup is done from the device itself or with a remote sensor display (RSD) tool.  In either case, users may easily configure output types, response speeds, sensing ranges, and more. Banner sensors use industry-standard M12 connections. After selecting the best sensor for your application, check out the accessories section on the product page for compatible cables to complete your solution.

    T30UX Series Temp Compensation Ultrasonic Sensor
    T30UX系列溫度補償超音波感測器

    一體型直角外殼超音波感測器，內置溫度補償裝置。提供類比或可設定的數位訊號型號。感測範圍為3 m。

    Read More
    LM Series Precision Measurement Sensor
    LM 系列高精準度雷射量測感測器

    LM150 高精準度雷射量測感測器提供同級最佳性能表現，能在實際應用中提供穩定的表現，並有著精巧的外型以及簡單易用的使用者體驗。

    Read More
    LE Series 1 m Range Laser Displacement Sensor
    LE系列雷射位移感測器

    LE 系列檢測範圍可達1000 mm，可以應用於品管過程的控制、篩選和檢查作業。

    Read More
    聯絡我們的工程師
    Find a Distributor
    列印
    加入我的資料庫
    已加入