More Devices, Machine Mountable, and No Learning Curve

RSio Remote Safe I/O

Banner’s RSio Remote Safety I/O block brings In-Series Diagnostics (ISD) and six independently configurable hybrid I/O ports to CIP Safety™ systems. Two outputs provide control signals for final switching devices, safety-rated devices, or non-safety devices. Six inputs each support up to 32 ISD-enabled devices with device-level diagnostics for faster troubleshooting and expanded PLe/SIL3 safety coverage. RSio is configured entirely in Rockwell Automation's Studio 5000® via an included Add-On Profile EDS file with user-selectable port presets that simplify safety device integration.

  • Six independently configurable hybrid I/O ports support safety-rated or standard devices, giving more flexibility in how each port is used
  • Inputs support dry contacts or solid-state safety devices, In-Series Diagnostics (ISD), and standard control signals; outputs support both safety-rated and standard devices
  • Setup directly in Rockwell Automation’s Studio 5000® streamlines integration into CIP Safety™ systems with no extra software needed
  • User-selectable port presets for common safety devices, such as e-stops, light curtains, and safety switches, are included in Banner’s Add-On Profile (AOP) EDS file to simplify setup
  • Six inputs each support up to 32 ISD-enabled safety devices, up to 192 devices on a single RSio, enabling device-level diagnostics for faster troubleshooting while minimizing wiring and providing safety coverage up to Cat 4 PLe/SIL3
  • Select from models with either Mini power (up to 10 A pass-through) or M12 L-Code power (up to 16 A pass-through), with the same M12 A-Code I/O ports and core functionality on both models
  • Enable or disable test pulses independently on inputs and outputs to match device and application requirements
  • Increase installation flexibility with IP67-rated, machine-mountable safe I/O that reduces wiring and cabinet size

Studio 5000 Logix Designer and GuardLogix are trademarks of Rockwell Automation, Inc.

RSIO Group

RSio Remote Safe I/O

Familiar Software

Seamless Integration into Studio 5000®

RSio configures entirely in Rockwell Automation’s Studio 5000®, the same software environment used with GuardLogix® safety PLCs, making it easy to take advantage of hybrid I/O and Banner’s In-Series Diagnostics (ISD) technology without requiring additional software.

User-Selectable Port Presets

Configure Safety Solutions Faster

A Banner-provided Add-On Profile (AOP) EDS file, imported into Studio 5000®, streamlines setup and includes user-selectable presets that make it much faster and easier to integrate common safety devices than the standard, tedious configuration procedure.

Configurable I/O

Create Complete Solutions on One Block

Banner’s RSio Remote Safety I/O block provides six independently configurable hybrid I/O inputs and two configurable outputs that support safety-rated or standard devices, giving controls engineers flexibility in how each port is used. Inputs support dry-contact or solid-state safety devices, In-Series Diagnostics (ISD), and standard control signals. The two configurable outputs provide control signals for final switching devices, safety-rated devices, or non-safety devices, with ON/OFF readback.

Connect More Devices with Less Wiring

In-Series Diagnostics (ISD) makes it possible for each RSio input to connect up to 32 ISD-enabled safety devices, or safety devices brought in through ISD Connect, in a daisy-chain while providing diagnostic data for each individual device. ISD chains use plug-and-play M12 T-connectors and cabling, with the ISD protocol traveling over the same wiring as the OSSD signals, providing continuous device status and clear identification of which device in the chain causes a stop. 

RSio supports a mix of ISD and non-ISD devices across its six inputs. Each input can monitor either a single safety device directly or an ISD chain of up to 32 devices—192 devices total across one RSio.

Ethernet Passthrough

Extend Distributed I/O with Network Flexibility

RSio includes an integrated dual-port Ethernet switch for pass-through networking, allowing multiple RSio Remote Safe I/O blocks to be connected in daisy-chain, star, a combination of daisy-chain and star, or DLR ring network topologies without consuming external switch ports.

Daisy-Chain

Star

Daisy-Chain & Star

DLR Ring

Power Passthrough

Power Downstream Devices

RSio is available in two model options that provide either M12 L-Code power connectors rated for up to 16 amps of pass-through, or with Mini power connectors rated for up to 10 amps of pass-through capacity for powering the module and downstream devices.

Applications

Proven Solutions that Keep Operations Running

Have a Remote Safe I/O Application Question?

手冊和目錄

英文文件

檔案名稱
RSio Remote Safe I/O Flyer
PDF
1.1MB
28 Jan 2026
產品資料檔案

英文文件

檔案名稱
DXM EDS File
ZIP
9K
26 Jan 2026
技術資料

英文文件

檔案名稱
Remote Safe I/O Block Product Manual
PDF
4.6MB
22 Jan 2026
PLC 支援文件

英文文件

檔案名稱
RSio Studio 5000 AOI & UDT Files
ZIP
16K
26 Jan 2026
  • RSio Product Overview

    RSio Product Overview

    A brief overview of the features and benefits of the RSio Remote Safe I/O

    Watch Video
  • How-to Configure RSio Presets

    How-to Configure RSio Presets

    A demonstration of how to configure the presets for the RSio Remote Safe I/O Block.

    Watch Video
  • How to Install RSio EDS File

    How to Install RSio EDS File

    A demonstration of how to install the EDS software for the RSio Remote Safe I/O Block.

    Watch Video
Show All

Product Selection

Have a Technical Question?

Our application engineers are here to help with expert guidance and support. Send us your inquiry, and we’ll get back to you as soon as possible. We’re here to make sure you get the answers you need.

加入我的資料庫
已加入