Serie PVA
Serie Cortina PVA Compacta para Verificación de Parte
- Compact package, available in 4 lengths to fit many sizes and configurations of existing parts bins
- Range up to 2 m (6.5 ft)
- Two-component system (asynchronous emitter and receiver) needs no sync wire or controller box.
- Clearly visible green job indicator lights mounted on either side of emitter and receiver housings; the light can be remotely controlled to initiate user action with a solid ON or blinking condition
- Two frequency settings to prevent crosstalk in close-proximity, multiple-array installations
- Heavy-duty protective brackets available
- Paquete compacto, disponible en 4 longitudes para adaptarse a muchos tamaños y configuraciones de los contenedores de piezas
- Rango de hasta 2 m (6.5 ft)
- El sistema de dos componentes (emisor y receptor asíncrono) no necesita cable de sincronización ni controlador.
- Las luces indicadoras de trabajo verde son claramente visibles montadas a ambos lados del emisor y receptor; la luz puede ser controlada remotamente para iniciar la acción del usuario con un sólido encendido o condición de parpadeo
- Dos ajustes de frecuencia para evitar la interferencia en instalaciones de proximidad cercana y de múltiples arrays
- Soportes resistentes de protección disponibles
Descargas
Software
Folletos y Catálogos
Aplicaciones
Long Bin Pick-to-Light
The EZ-LIGHT PVA pick-to-light sensors provide a reliable error-proofing solution for various operation systems. The light indicate to assemblers which items to pick and in which order to pick them.
Verificación de Retiro de Parte en el Ensamble Automotriz
En una planta de ensamble automotriz, se usan pernos para fijar algunas partes de forma temporal. Para asegurarse de que se quitan los pernos, la estación de inspección incluye un contenedor para depositarlos que está equipado con un sensor EZ-LIGHT pick to light.
Pick Sequence Indication and Pick Verification
A pair of EZ-LIGHT PVA pick-to-light sensors are mounted to a rack on either side of a bin. In response to a signal from a process controller, the PVA illuminates to show the assembler which part to pick next. When the assembler's hand enters and leaves the bin, the controller recognizes that the part is picked and lights up the PVA for the next bin in the pick sequence.
Order Fulfillment
The system controller issues an instruction to pick an item from a particular location. The controller turns on the PVA’s job lights at the specified location. The job lights go off when an item from that location is removed. If multiple items are required from one location, the job light stays on until the correct number of items are removed. The bright light of the EZ-LIGHT PVA pick-to-light sensor makes it possible to see which part to pick from a distance, saving time.
Pick-to-Light Solutions
Several technologies and solutions are available for bin-picking applications for error-proofing processes. Light arrays prompt the operator for part selection with integral job lights, then reliably sense retrieval of the part, using an array of visible red or infrared sensing beams located in front of the bin.