소계

USD

BEAM-ARRAY Series

Beam-Array Family

Beam-Array Family

BEAM-ARRAY Controllers Image

Complete BEAM-ARRAY System needs a controller, an emitter/receiver pair, and interconnectinc cables
Offers choice of RS-232 serial output with 15 to 20V dc supply voltage, or analog/discrete outputs with either 105 to 125V dc or 210 to 250V ac supply voltage
Uses DIP switches for up to two of eight programmable measurement modes
Includes continuous or gated scanning
Allows control of scan initiation with separate gate input
Ignores activity in one or two fields along the length of the array with programmable blanking, depending on model
Emitters and receivers are available in four array lengths from 300 mm to 1.2 m and provides a 3 m range and 11.4 mm minimum object detection size
Emitter/receiver pairs are constructed of 2 1/4" diameter tubular aluminum with epoxy-encapsulated circuitry
BMLV Series is also available
- System is ideal for sensing or counting large objects falling through the sensing area.
- Minimum object size is 50 mm at 0.6 m from the sensor and 125 mm at 2.1 m from the sensor.
- Sensors are available in the following lengths: 1200, 2400, 3600 and 4800 mm.
- Maximum range is 3 m, when used with Banner high-grade retroreflective tape.
- Output choices are light operate and dark operate.
- Housing is rugged extruded aluminum.
- Installation and alignment are simple and fast

Product Selection

로딩 중...

결과 범위 좁히기

비교 지우기

비교 지우기

선택한 필터

BMHL4G

BMHL4G WINDOW SINGLE PACK YEL
BMHL4GSS

BMHL4GSS HEATED WINDOW YELLOW 4 FT ARRAY
BMHL5G

BMHL5G WINDOW SINGLE PACK YEL
BMHPS5

BMHPS5 POWER SUPPLY 28 V ac 8 AMPS
BMHPS6

BMHPS6 POWER SUPPLY 36 V ac 8 AMPS

추가 로드 모두 표시