• 뒤로

    • Improving Detection of Surface Imperfections with Green LED Lighting

    Green-Hood inspection

    Application: Enhance visibility of surface imperfections on manufacturing materials

    Challenges: Ambient and white light provide insufficient contrast for defect detection

    Solution: Green industrial LED task lighting

    Benefits: Improved contrast and long-lasting, affordable illumination 

    To help prevent poor quality products from being distributed to customers, it is important for companies to inspect products before they leave the manufacturing plant. Ambient and overhead white light does not provide sufficient contrast for surface inspections of objects. When inspecting metal or plastic surfaces in these conditions, imperfections such as fingerprints, dirt, or damaged areas can easily be overlooked. Materials that are shipped with these flaws may require additional repair or recall, which would then drive up unwanted expenses.

    Description

    Green wavelengths are easiest for the human eye to see and adding green lights into the inspection area helps maximize the effectiveness of metal, glass, and plastic inspections. Adding green lighting into this type of work area yields higher contrast compared to white or ambient light. This higher contrast makes the defects more visible to the human eye.

    Even some oils react more to bright green lights, making the flawed oil spots more visible. This is especially important in the automotive industry where oil residue on metalized paint can make fisheye imperfections, which are small circular spots that appear on contaminated surfaces.

    Green task lighting can be difficult to find. Fortunately, Banner Engineering offers an assortment of LED products available in green, such as the WLB92, WLS28-2, WLS27, and WLA task lights. Using LED lighting on factory floors offers many advantages. The various rugged light fixtures offer high quality and low power illumination with the capability to be installed and rotated at different angles to better accommodate the needs of the operator. They have an estimated lifespan of over 50,000 hours and will never require replacement bulbs or ballasts, providing years of maintenance-free illumination. 

    Featured Products

    WLB92 대형 고휘도 LED 작업 조명
    WLB92 대형 고휘도 LED 작업 조명

    저 베이 조명 및 로봇 작업 셀 응용 분야를 위한 가장 밝고 조절 가능하며 균일한 조명. 다양한 장착 옵션으로 간편하게 설치할 수 있습니다.
    WLS28-2 다목적 다용도 LED 스트립 조명
    WLS28-2 다목적 다용도 LED 스트립 조명

    28mm 프로파일 컴팩트 LED 조명을 다양한 산업 분야에 사용 가능. 최대의 유연성을 위해 동작 센서, 렌즈 및 창을 사용할 수 있음.
    거친 환경을 위한 WLS27 비산 방지 LED 조명
    거친 환경을 위한 WLS27 비산 방지 LED 조명

    비산 방지, 내화학성 하우징 사용. 세척에 대해 IP69K 등급. 조명과 표시가 결합된 다색 옵션.
    WLA 시리즈 LED 에어리어 라이트
    WLA 시리즈 LED 에어리어 라이트

    넓은 지역을 밝힐 수 있는 고출력 LED 어레이 라이트 렌징이 있거나 없는 밀폐형 모델, 침수에 대응하는 밀봉형 모델도 공급 가능합니다.
    엔지니어에게 문의
    Find a Distributor
    인쇄
    내 라이브러리에 추가
    추가됨