Safe Material Access
To prevent operator injury by guarding open access zones to the hazardous area, while allowing parts and material to flow into the work area. This configuration is designed to protect personnel while increasing productivity.
In this application, a hazardous work cell is completely guarded to prevent personnel from entering the area. In order to allow parts and material to flow into the area efficiently, entry and exit zones will be left open.
The EZ-SCREEN safety light screen is positioned in front of these zones and will stop the hazardous motion of the machine if an operator tries to reach or enter through these areas. This application requires the muting option of the EZ-SCREEN safety light screen curtain; sensors positioned to detect the moving part within a prescribed sequence and time will 'mute' the light screens while the part moves through the guarded access area, and will make the lighted screens active once the part has cleared the guarded zone. Parts are allowed to flow efficiently in and out of the area while the personnel is protected from the hazards.
Intuitive, easy-to-use, feature rich models available in 14, 23 & 40 mm resolutions and up to 1820 mm (6 ft) lengths with no dead zone. Highly visible alignment indicators and intuitive diagnostics simplify set-up and provide machine builders with additional value to meet a wide range of needs.