QS18 시리즈 다용도 광전 센서
범용 하우징 설계와 18mm 나사형 배럴이 장착된 다용도 광전 센서는 수백 가지 다른 센서 스타일을 이상적으로 대체할 수 있습니다.
New Products | news
Success Story | news
Success Story | news
Success Story | news
New Products | news
New Products | news
Success Story | DXM
Success Story | Wireless Solutions
Success Story | Wireless Gateways and Nodes
Success Story | QS18
Success Story | R58
Success Story | Smart Sensors
Success Story | PTL110
Success Story | PTL110
Success Story | PTL Products
Success Story | news
Success Story | news
Success Story
Success Story | K50FL
Success Story | LE
Success Story
Success Story | WLA
Success Story | 렌즈
Welcome to a short how-to video that will cover the dynamic teach mode for the QS18 Expert Photoelectric Sensors from Banner Engineering.
The dynamic teach mode takes multiple returned light measurements and automatically sets an optimal switching threshold, based on the lightest and darkest conditions of the application.
To begin, press and hold the pushbutton for more than four seconds, until the green power LED turns off and the amber output LED flashes twice per second.
While continuing to hold the button, present multiple on and off conditions to the sensor.
When you have finished presenting these conditions, release the pushbutton.
The power LED will flash three times and turn on solid, indicating that the sensor has been taught successfully.
If you need to flip the output condition, press the button seven times consecutively.
That covers the basics for using the dynamic teach mode for the QS18 Expert Sensors.
For more information, visit bannerengineering.com.
Application solutions, new product updates, answers to frequently asked questions, and more delivered 1-2 times a month.