TL50 핵심 시리즈

50mm LED 탑 조명 표시등

io-link_gray-icon

독립형 탑 조명 표시등은 오래가는 LED 기술을 사용하고 설치가 간단하며 작업자 안내 및 장비 표시가 잘 보입니다.

  • IO-Link 통신 기능을 갖춘 모델로 제공되며 대부분의 산업용  네트워크에 쉽게 통합되고 조명장치의 조명 세그먼트 및 가청 세그먼트를 원격 제어 및 모니터링할 수 있음
  • 지금 당사의 온라인 도구를 사용하여 귀하의 모델을 주문 구성하십시오.
  • 사전 배선 또는 퀵 디스커넥트 옵션을 사용하여 기계에 직접 빠르고 쉽게 설치할 수 있으며 조립이 필요하지 않음
  • 완전 독립형 디자인이므로 컨트롤러가 필요 없음
  • 단일 탑 조명에서 최대 7가지 색상, 표준 밝기에서 10가지 색상, 최대 밝기 탑 조명에서 5가지 색상을 표시할 수 있음
  • 여러 조명을 동시에 켤 수 있음
  • 주변광에 의한 잘못된 표시를 제거합니다. 표시등은 꺼지면 회색으로 표시됩니다.
  • 범용 AC 전압 모델 사용 가능

기술 자료

날짜
유형
크기
TL50CZ Compact Universal AC Voltage Tower Light -- Datasheet
7 May 2019
사양서
935K
TL50A Audible Indicators -- Datasheet
7 May 2019
사양서
655K
TL50Z Universal AC Voltage Tower Light -- Datasheet
7 May 2019
사양서
819K
TL50BLZ Beacon Universal AC Voltage Tower Light -- Datasheet
7 May 2019
사양서
858K
TL50C Compact Tower Light -- Datasheet
7 May 2019
사양서
1MB
TL50H High Brightness Tower Light -- Datasheet
7 May 2019
사양서
1.1MB
TL50BL Beacon Tower Light -- Datasheet
7 May 2019
사양서
1.1MB
TL50HZ High Brightness Universal AC Voltage Tower Light -- Datasheet
7 May 2019
사양서
807K
TL50 Tower Light with IO-Link -- Datasheet
7 May 2019
사양서
992K
TL50 Tower Light -- Datasheet
7 May 2019
사양서
1.1MB
IO-Link Data Reference Guide: TL50 Tower Light
5 Feb 2018
제품 설명서
80K
날짜
유형
크기
TL50 Tower Light - French
02/05/09
사양서
990K
날짜
유형
크기
TL50 Tower Light -- Datasheet (German)
02/05/09
사양서
1MB
날짜
유형
크기
TL50 Tower Light -- Datasheet (Italian)
02/05/09
사양서
1MB
날짜
유형
크기
TL50 Tower Light -- Datasheet (Japanese)
02/05/09
사양서
891K

제품 데이터 파일

날짜
유형
크기
TL50 IODD File
TL50 IODD File
6 Mar 2018
IODD 파일
276K

마케팅 자료

날짜
유형
크기
TL50 Tower Light Sell Sheet
9 Apr 2019
제품 브로셔
1.4MB
EZ-LIGHT TL50 Tower Light Flyer
11 Feb 2010
제품 브로셔
4.7MB
TL50 Tower Light Family
TL50 Tower Light Family

The EZ-LIGHT® TL50 Tower Light Family indicators, including the Standard Tower Light and Beacon Tower Light, are easy to install and provide highly visible operator guidance and equipment status indication.

TL50 타워 라이트 및 K50 표시기용으로 재설계된 파이프 어댑터[비디오]
TL50 타워 라이트 및 K50 표시기용으로 재설계된 파이프 어댑터 [비디오]

Banner의 재설계된 파이프 어댑터는 당사의 TL50 타워 라이트 및 K50 표시기를 위한 강력하고 견고하며 사용하기 쉬운 지원 솔루션으로 이러한 제품의 미적인 매력은 변함이 없습니다.

펌프 패널 상태 표시
펌프 패널 상태 표시

EZ-LIGHT TL50 타워 조명과 같은 Banner의 타워 조명 솔루션을 펌프 패널 상단에 장착하여 펌프의 상태를 쉽게 표시할 수 있습니다. 조명 타워는 잘 보이므로 직원은 패널 도어를 열 필요없이 패널을 신속하게 확인할 수 있습니다. 여러 개의 조명가 동시에 켜질 수 있으므로 여러 메시지를 한 번에 전달할 수 있으며 펌프가 과열되어 즉각적인 주의가 필요한 경우 경고음이 발생합니다.

자세히 알아보기
Indicating Machine Status
Indicating Machine Status

An EZ-LIGHT TL50 Tower Light is mounted on top of the machine to communicate its status. The highly visible light tower allows employees to quickly check the machine, without needing to constantly monitor its status. Multiple tower lights can be on simultaneously, so several messages can be conveyed at once. The Tower Light is highly visible from all angles, and the indicators appear gray when off to eliminate false indication from ambient light.

자세히 알아보기
Wireless Call for Parts
Wireless Call for Parts

With high-quality LED lights and multiple colors in one device, Banner's multi-segment audibleTL50, combined with the K50 Touch and PM8 wireless system result in efficient call for part processes. To begin, Banner’s K50 ergonomic touch buttons are installed in a supervisor station and numbered according to their corresponding PML8 Wireless Nodes, which are installed at individual workstations along with an audible tower light.

자세히 알아보기
Highly Visible Indication in Extremely Bright Environment
Highly Visible Indication in Extremely Bright Environment

Banner’s EZ-LIGHT TL50 Beacon Tower Light is visible in daylight, making it ideal for many indication status applications. It is durable and equipped with long-lasting, energy-efficient LEDs, helping guide operators on the factory floor.

자세히 알아보기
Streamlining Call for Parts or Service [Success Story]
Streamlining Call for Parts or Service [Success Story]

To improve efficiency, assemblers at work stations need a way to call for parts and service that doesn’t involve them leaving their work stations. Getting parts more quickly would improve production efficiency, and using a system of remote indicators would let the supervisors to see the status of each work station, allowing the supervisors to fix production problems quickly and to collect production metrics.

자세히 알아보기
Increasing Production Line Efficiency
Increasing Production Line Efficiency

An electronic component assembler needed to increase the efficiency of its production lines by reducing the amount of time technicians and managers were away from their work stations. The previous system required operators to manually walk over to the manager area to request more work or assistance with a technical issue.

자세히 알아보기
Monitoring Power Use to Avoid Peak Use Charges
Monitoring Power Use to Avoid Peak Use Charges

A SureCross DX80 wireless system can be installed to make the system work better. The DX80 Node accepts a signal from the PLC operating the smart power system that shows which capacitors are being used. The signals are transmitted to a DX80 Gateway installed in a visible location. The Gateway uses EZ-LIGHT Tower Lights to indicate which capacitors are being used and an alarm to notify personnel when energy use drifts outside the desired range.

자세히 알아보기
Indicating AGV Call System Status
Indicating AGV Call System Status

This is an example of an Andon application, where tower lights on production lines are used to indicate operation status. This illustration, demonstrating a possible utilization of Andon light indication, has EZ-LIGHT TL50 Tower Lights mounted at each workstation to indicate the status of that workstation.

자세히 알아보기
Exit Chute Jam Indication
Exit Chute Jam Indication

Banner’s Q30FF600 background suppression sensor confirms when a product enters the exit chute to ensure it came off the sortation system and that there isn’t a jam in the product chute. The Q30FF600 has long range sensing up to 600 mm, which is the standard width of many chutes.

자세히 알아보기
Communication in a Busy Manufacturing Site [Success Story]
Communication in a Busy Manufacturing Site [Success Story]

As more components pass through the oven, keeping pace with the flow of items to be unloaded becomes increasingly difficult. Congestion in the sortation area builds. Items can easily be misdirected or even damaged. A pause in the flow of parts allows the unloading operator to correct mistakes and clear a pickup station. However, the distance between the unloading and loading areas as well as ambient interference from surrounding machinery complicates communication between operators.

자세히 알아보기
Call for Parts at a Furniture Manufacturer
Call for Parts at a Furniture Manufacturer

The customer needs a solution that can increase the forklift operator's response time by putting indicators on the forklift's dashboard and can also allow the forklift operator to acknowledge the request, which eliminates redundant part deliveries by multiple operators.

자세히 알아보기
Wireless Machine Monitoring
Wireless Machine Monitoring

Banner’s solution to automate machine monitoring combines a SureCross Wireless I/O Network and the Banner TL50 Tower Light indicator to create a Wireless EZ-LIGHT™. This Node provides a simple plug-n-play solution for machine status applications.

자세히 알아보기
Packaging Frozen Dinners on a Cartoner
Packaging Frozen Dinners on a Cartoner

WLS28 Work Light Strips: Bright, long-lasting LED light strips provide optimal visibility inside the cartoner for operator access and easily fit on the machine without obscuring access Safety Hinge Switches: Stainless steel, load-bearing safety hinge switches support the cartoner’s machine door and will shut down the machine if the doors are opened, and minimize the risk of intentional defeat

자세히 알아보기
자동화된 임상 실험실에서 기계 상태 표시
자동화된 임상 실험실에서 기계 상태 표시

임상 실험실에서는 시료를 신속하게 처리해 높은 수준의 처리량을 유지해야 하는데, 검사 절차 중 발생하는 모든 지연은 작업흐름을 중단시킬 수 있습니다. K50L2와 같은 LED 조명은 기계 상태를 알려 실험실 작업자가 시기 적절하게 오류를 수정하고, 시료를 처리하고, 결과를 수집할 수 있도록 합니다.

자세히 알아보기