DF-G1 Series
General Purpose Fiber Optic Amplifier
- Models with IO-Link enable a point-to-point communication link between a master device and a sensor, facilitating remote monitoring, teaching, and configuration
- Easy to read dual digital displays simultaneously show signal level and threshold
- Simple user interface ensures easy sensor set-up and programming
- Expert TEACH and SET methods ensure optimal gain and threshold for all applications, especially low contrast applications
- IO-LINK models available
- Models for detection of extraneous light sources available
- Response speeds as fast as 200 µs
- Thermally stable electronics minimize warm-up drift and reduce the effect of side-by-side mounting of multiple fiber amplifiers
- ECO (economy) display mode reduces amplifier power consumption by 25%
- Cross talk avoidance algorithm allows two fiber assemblies to operate in close proximity for many applications
Downloads
기술 문헌
제품 데이터 파일
PLC 지원 파일
소프트웨어
브로셔 및 카탈로그
Application Notes
Window Tint Verification
Banner’s DF-G1 light receiver sensor differentiates between windows with or without tint based on how much external light passes through the glass. The DF-G1 self-contained device has a simple push button set-up for easy adjustment along the conveyor. An intuitive user display allows for immediate sensor feedback.
Light Receiver Detects Broad Spectrum of Lights
Banner’s DF-G1 fiber optic light receiver is a unique, cost-effective product that is designed to be placed directly in test equipment to ensure lights are functioning correctly. With the same intuitive dual display and programming interface as other DF-G1 models, the light receiver can be integrated and interfaced with assembly and test equipment control systems for pass/fail inspection.
Wafer Cassette Detection Under Water
Silicon wafers are transported from one process to another in cassette on a conveyor that is totally submerged in de-ionized water. A D10 sensor has teflon-encapsulated opposed-mode fibers that are located on either side of the conveyor. When the cassette is present, the opposed beam is broken.
소형 부품 계수
Banner's DF-G1 Series amplifier provides a simple setup and calibration for small part counting applications. Once the amplifier is setup, the easy-to-read digital dual display allows for simple operation because it shows the signal level and threshold simultaneously.
Syringe Inspection
The DF-G1 sensor can be easily configured for detection of small targets, such as syringes, in a limited space packaging process. With Banner's powerful TEACH and SET methods, optimal gain and threshold can be used for a range of applications, including low contrast and long range applications.
픽 앤 플레이스 기계 앞쪽 가장자리 감지
광섬유는 작은 크기 때문에 픽 앤 플레이스 기계에 이상적인 솔루션입니다. DF-G1 증폭기는 광섬유와 분리할 수 있어 작업자가 데이터 모니터링을 위해 디지털 듀얼 디스플레이 화면에 쉽게 접근할 수 있습니다. 또한, 누화 방지 알고리즘을 통해 2개 이상의 증폭기가 서로 매우 가까운 거리에서 작동할 수 있습니다.
Videos
![DF-G1 액체 수위 감지[비디오]](/content/dam/banner-engineering/video/video-thumbnails/applications/DF-G1%20App%20Thumbnail.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
DF-G1 액체 수위 감지[비디오]
DF-G1 엑스퍼트 듀얼 디스플레이 광섬유 증폭기는 사용하기 쉬운 광섬유 시스템으로, 신속하게 설정할 수 있어 설치 시간이 짧습니다. 사용자 인터페이스가 직관적이고, 증폭기에는 듀얼 디스플레이 화면이 장착되어 있어 신호 레벨과 임계값을 동시에 표시하므로 조작이 간단합니다. DF-G1는 예열 드리프트가 최소화되어 있어 시동 후 최대 성능을 낼 때까지 불과 몇 분 밖에 걸리지 않습니다. 이는 누수 감지 및 수위 관리 응용 분야에 이상적입니다.
How-To Guide: DF-G Dark Set
This video covers the basics of setting up the Dark Set function of the DF-G Fiber Optic Amplifier from Banner Engineering.
How-To Guide: DF-G Light Set
This video covers the basics of setting up the Light Set function of the DF-G Fiber Optic Amplifier from Banner Engineering.
How-To Guide: DF-G Window Set
This video covers the basics of setting up the Window Set function of the DF-G Fiber Optic Amplifier from Banner Engineering.
How-To Guide DF-G Dynamic Teach
This video covers the basics of setting up the Dynamic Teach function of the DF-G Fiber Optic Amplifier from Banner Engineering.
How-To Guide: DF-G 2-Point Teach Configuration
This video covers the basics of setting up the DF-G Fiber Optic Amplifier 2-Point Teach Configuration from Banner Engineering.
-
DF-G1-PS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-KS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
2 m (6.5 ft) Cable -
DF-G1-KS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-KS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 18-30 V dc
Output 1: Push/Pull with IO-Link; Output 2: PNP only
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-KS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
4-pin M8 Integral QD -
DF-G1-NF-Q7
DF-G1 Dual Display Fiber Amplifier
With Fluorescent Filter
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-NR-2M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
2 m (6.5 ft) Cable -
DF-G1-NR-9M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source
Input: 10-30 V dc; Output: 1 NPN
9 m (30 ft) Cable -
DF-G1-NR-Q3
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NR-Q5
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-NR-Q7
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-NS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
2 m (6.5 ft) Cable -
DF-G1-NS-9M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
9 m (30 ft) Cable -
DF-G1-NS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-NS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-PR-2M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
2 m (6.5 ft) Cable -
DF-G1-PR-Q3
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-PR-Q5
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-PR-Q7
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
4-pin M8 Integral QD -
DF-G1-PS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
2 m (6.5 ft) Cable -
DF-G1-PS-9M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
9 m (30 ft) Cable -
DF-G1-PS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-PS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
4-pin M8 Integral QD