.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
BEAM-ARRAY Series
- Complete BEAM-ARRAY System needs a controller, an emitter/receiver pair, and interconnectinc cables
- Offers choice of RS-232 serial output with 15 to 20V dc supply voltage, or analog/discrete outputs with either 105 to 125V dc or 210 to 250V ac supply voltage
- Uses DIP switches for up to two of eight programmable measurement modes
- Includes continuous or gated scanning
- Allows control of scan initiation with separate gate input
- Ignores activity in one or two fields along the length of the array with programmable blanking, depending on model
- Emitters and receivers are available in four array lengths from 300 mm to 1.2 m and provides a 3 m range and 11.4 mm minimum object detection size
- Emitter/receiver pairs are constructed of 2 1/4" diameter tubular aluminum with epoxy-encapsulated circuitry
- BMLV Series is also available
- System is ideal for sensing or counting large objects falling through the sensing area.
- Minimum object size is 50 mm at 0.6 m from the sensor and 125 mm at 2.1 m from the sensor.
- Sensors are available in the following lengths: 1200, 2400, 3600 and 4800 mm.
- Maximum range is 3 m, when used with Banner high-grade retroreflective tape.
- Output choices are light operate and dark operate.
- Housing is rugged extruded aluminum.
- Installation and alignment are simple and fast
Product Selection
