Wireless I/O, Data, and Network Connectivity

Create expandable point-to-multi-point wireless networks that distribute I/O over large areas. Input and output types include discrete (dry contact, PNP/NPN), analog (0 to 10 V dc, 0 to 20 mA), temperature (thermocouple and RTD), and pulse counter.

If you do not see what you are looking for, Ask an Expert.

Narrow Results

Clear All Filters

+- Ultrasonic

  • (1)

+- Device Type

  • (2)
  • (3)
  • (4)
  • (1)
  • (1)

+- Input Output

  • (6)
  • (6)

+- Industrial Network

  • (3)
  • (5)
  • (3)
  • (4)
  • (7)

+- Housing Style

  • (3)
  • (3)
  • (2)
  • (3)
  • (1)

+- Hazardous Area

  • (1)

+- Temperature Input

  • (4)

+- Relative Humidity Input

  • (2)

+- Counter

  • (3)

+- Vibration Sensor Input

  • (2)
selected filters
  1. Performance Board Modules

    Sure Cross® Performance Embeddable Board Modules were specifically designed for the needs of industrial users to provide connectivity where traditional wired connections are not possible or cost prohibitive. Performance Embeddable Board Modules communicate with all Sure Cross Performance radios.

  2. Multihop Board Modules

    MultiHop Modbus Board Modules extend the range of Modbus or other serial communication networks. Each radio may be set to act as either a master, repeater or slave. Models are available with built in discrete and analog I/O, which can be accessed using the Modbus protocol.

  3. Serial Data Radios

    Sure Cross® MultiHop Serial Data Radios are wireless industrial communication devices used to extend the range of serial communication networks.

  4. Ethernet Data Radios

    Sure Cross® MultiHop Ethernet Data Radios are wireless industrial communication devices used to create point to multipoint configurations of wireless Ethernet networks.

  5. Industrial Wireless Controller: DXM Series

    Low power consumption, ability to withstand harsh environments, flexible power supply requirements and Modbus RTU communications makes this module ideal for the industrial market.

  6. Hazardous Area Radios - Metal Housing

    Hazardous area radios are a state-of-the-art combination of wireless communication, battery technology and intrinsically safe electronics. Networks are formed using DX80 Preformance Gateways installed beyond the hazardous area and one or more Nodes operating in the same frequency band.

  7. Performance Series Gateways and Nodes

    Create point-to-multi point networks that distribute I/O over large areas. Input and output types include discrete (dry contact, PNP/NPN), analog (0 to 10 V dc, 0 to 20 mA), temperature (thermocouple and RTD), and pulse counter.

  8. Multihop Modbus I/O Data Radios

    MultiHop Modbus Data Radios extend the range of Modbus or other serial communication networks. Each radio may be set to act as either a master, repeater or slave. Models are available with built in discrete and analog I/O, which can be accessed using the Modbus protocol.