E-Stop & Guard Monitoring Modules

125689

  • Modules monitor up to 10 external devices for contact failure or wiring faults
  • Module goes into lockout mode if it detects a fault
  • Available voltages include 24V dc 24V ac/dc 115V ac or 12 to 24V dc or 230V ac or 12 to 24V ac/dc
  • Modules monitor positive-opening E-stop and interlock switches
  • Models are available with 2 to 4 normally open safety outputs, depending on module
  • Safety outputs are rated 4 or 6 amps, depending on module
  • Non-safety auxiliary outputs are available on most modules
  • Two modules allow central monitoring and control over a DeviceNet control network
  • Ratings are NEMA 1 and at least IEC IP20
  • Housings are rugged polycarbonate
  • Bright red and green LED indicators show modules operating status

    Technical Literature

    Date
    Type
    Size
    ES-FA-9AA and ES-FA-11AA Safety Modules
    08/12/16
    Datasheet
    381K
    ES-FA-9AA and ES-FA-11AA Safety Modules (Short Multi-Lingual)
    07/06/16
    Datasheet
    107K
    GM-FA-10J Gate Monitoring Module (24V ac/dc, 1 or 2 inputs) and SI-MAGxx
    07/07/15
    Datasheet
    631K
    ES-UA/VA-5A Safety Modules (4 N.O. safety outputs, 12-24V dc/115  or 230V ac)
    04/19/13
    Datasheet
    483K
    ES-FA-6G Safety Module (3 N.O. safety outputs, 24V ac/dc, 1 input)
    01/31/13
    Datasheet
    362K
    ES-TA-3F1 Safety Module (2 N.O. safety outputs, 24V dc, 10 inputs, DeviceNet)
    08/18/06
    Datasheet
    651K
    ES-TA-3D1 Safety Module (2 N.O. safety outputs, 24V dc, 6 inputs, DeviceNet)
    11/10/03
    Datasheet
    456K

    Software

    Date
    Type
    Size
    ES-TA-3F1
    ES-TA-3F1
    01/13/03
    Software
    3K
    ES-TA-3D1
    ES-TA-3D1
    01/13/03
    Software
    3K
    Icon 131, ico format
    01/13/03
    Software
    1K
    Icon 131, bmp format
    01/13/03
    Software
    1K

    Marketing Literature

    Date
    Type
    Size
    F142 Safety Solutions 16 Page - UK English
    07/14/15
    Product Brochure
    3.5MB
    (Part D) 2006-07 Safety Catalog (Pg 105-134) - Safety Modules
    04/04/06
    Catalog
    1.9MB
    Gate Monitoring Module
    Gate Monitoring Module

    The safety module monitors the magnetic sensor for actuation when the guard opens, for failure modes, and for closing. It also provides two safe switching outputs and monitoring of device under control.

    Read More
    Product Selection
    Loading...

    Narrow Results

    clear all filters

    +- Output Configuration

    • (1)
    • (1)
    • (1)
    • (1)
    • (1)
    • (2)

    +- Supply Voltage

    • (3)
    • (2)
    • (1)
    • (1)
    1. ES-FA-11AA

      logo with r symbol

      ES-FA-11AA 22.5mm E-STOP MODULE 2N/0 1N/C

    2. ES-FA-6G

      logo with r symbol

      Emergency Stop Switch
      Inputs: One 1-channel type; 24V ac/dc
      Outputs: 3 channels; Terminal Block: Fixed
      Dimension: 22.5mm (0.9 INCH) width

    3. ES-FA-9AA

      logo with r symbol

      Emergency Stop Switch
      Inputs: One 2-channel type; 24V ac/dc
      Outputs: 3 channels; Terminal Block: Detachable
      Dimension: 22.5mm (0.9 in) width

    4. ES-FL-2A

      logo with r symbol

      Emergency Stop Switch
      Inputs: One 2-channel type; 24V ac/dc
      Outputs: 2 channels; Terminal Block: Fixed
      Dimension: 45mm (1.8 INCH) width

    5. ES-UA-5A

      logo with r symbol

      ES-UA-5A E-STOP and Interlocked Guard Safety Module
      115AC/12-24VDC, 45 mm DIN Rail
      4N/O, 1N/C, 2 PNP

    6. ES-VA-5A

      logo with r symbol

      ES-VA-5A E-STOP and Interlocked Guard Safety Module
      230AC/12-24VDC, 45 mm DIN Rail
      4N/O, 1N/C, 2 PNP

    7. GM-FA-10J

      logo with r symbol

      Gate Monitoring Safety Module
      Supply Voltage: 24V ac/dc +/- 20%
      Output Type: 2 redundant safety relay contacts