조립 및 로봇 공학 성공 사례

  1. An equipment manufacturer builds test and measurement machinery for the auto industry. Operators access machine systems through the control cabinet. Intense illumination of the cabinet facilitates machine maintenance and management. Multiple AC powered fluorescent light fixtures had been used for this task.

  2. American Hoffmann Corporation chose WLB32 LED light bars to illuminate work areas, enclosures and control cabinets, replacing fluorescent light fixtures. The superior light distribution offered by the WLB32 LED lights lights, as well as the ease of installation were key factors in the company's decision.

  3. 25mm 마이크로 렌즈가 장착된 iVu Plus BCR Gen 2는 휴대식 바코드 판독기를 대체하여 차량 변속기에서 밀도가 높고 읽기 어려운 QR 코드로부터 데이터를 수집합니다. WL50S 고휘도 LED 스포트 라이트가 대상 영역을 비춥니다.

  4. 자동차 공급 회사는 다양한 차량 시스템을 제조합니다. 좌석 시스템은 안락함과 안전성을 향상시키는 기능과 구조 및 디자인이 결합되어 있습니다. 좌석 하단에 설치된 무게 센서는 차량 안전 시스템과 함께 좌석에 앉은 사람의 크기와 위치를 결정합니다. 이러한 요소는 사고 발생 시 에어백을 효율적으로 사용하는 방법이나 에어백의 사용 여부에 영향을 줍니다.

  5. 조립 도중, 시트 높이 조정, 전후 이동, 직립 및 기울기 동작을 측정하기 위해 검사가 수행됩니다. 각 검사에는 2개의 센서가 사용됩니다. 이 센서는 시트에 쉽게 접근하고 자유로운 이동이 가능하도록 컨베이어 라인에 배치됩니다. 검사 중에 시트는 센서에서 최대한 1미터 정도 떨어져 있을 수 있습니다.

  6. The company wanted a cost effective lighting solution that would offer brilliant illumination on multiple work stations on large product testing machinery.

  7. During normal operation, operators load a welding machine with the frame components to be welded. The customer needed accurate machine run time data to determine why production goals were not being met.

  8. To improve efficiency, assemblers at work stations need a way to call for parts and service that doesn’t involve them leaving their work stations. Getting parts more quickly would improve production efficiency, and using a system of remote indicators would let the supervisors to see the status of each work station, allowing the supervisors to fix production problems quickly and to collect production metrics.

  9. As more components pass through the oven, keeping pace with the flow of items to be unloaded becomes increasingly difficult. Congestion in the sortation area builds. Items can easily be misdirected or even damaged. A pause in the flow of parts allows the unloading operator to correct mistakes and clear a pickup station. However, the distance between the unloading and loading areas as well as ambient interference from surrounding machinery complicates communication between operators.

  10. Betty Machine chose the SureCross® DX80 FlexPower® wireless network from Banner Engineering. This versatile, highly-scalable solution is built around a Gateway capable of two-way communication with multiple end-point Nodes.