Hinge Style Safety Interlock Switches
- Three types are available—load-bearing hinge, hinged lever and rotating hinge.
- Safety switching point can be set anywhere within 0-180° operating range on some styles.
- One-piece switch eliminates need for alignment, engagement and risk of breakage of a separate actuator.
- Design meets positive opening requirements for safety interlocks.
Downloads
Technical Literature
Marketing Literature
Application Notes
Packaging Frozen Dinners on a Cartoner
WLS28 Work Light Strips: Bright, long-lasting LED light strips provide optimal visibility inside the cartoner for operator access and easily fit on the machine without obscuring access Safety Hinge Switches: Stainless steel, load-bearing safety hinge switches support the cartoner’s machine door and will shut down the machine if the doors are opened, and minimize the risk of intentional defeat
Read More-
-
SI-HG63FQDL
Hinge Safety Interlock Switch Stainless Steel
Inline QD; Switch mounted left side w/ QD down
2NC/1NO; Micro M12 6-pin (Dual Key) QD
See SI-HGZ63FQDL Die-cast Zinc as a lower cost alternate -
SI-HG63FQDR
Hinge Safety Interlock Switch Stainless Steel
Inline QD; Switch mounted right side w/ QD down
2NC/1NO;Micro M12 6-pin (Dual Key) QD
See SI-HGZ63FQDRL Die-cast Zinc as a lower cost alternate -
SI-HG63FQDRR
Hinge Safety Interlock Switch-Stainless Steet
Right-angle QD; Switch mounted right side w/ switch body down
2NC/1NO; Micro M12 6-pin (Dual Key) QD
See SI-HGZ63FQDRR Die-cast Zinc as a lower cost alternate -
-
-
-
SI-HGZ63FQDL
Hinge Safety Interlock Switch
Die-Cast Zinc
Inline QD; Switch mounted left side w/ QD down
2NC/1NO;Micro M12 6-pin (Dual Key) QD -
SI-HGZ63FQDR
Hinge Safety Interlock Switch
Die-Cast Zinc
Inline QD; Switch mounted right side w/ QD down
2NC/1NO; Micro M12 6-pin (Dual Key) QD -
SI-HGZ63FQDRR
Hinge Safety Interlock Switch
Die-Cast Zinc
Right-angle QD; Switch mounted right side w/ switch body down
2NC/1NO; Micro M12 6-pin (Dual Key) QD -
SI-LS31RTD
Limit Switch: Rotary Shaft
Actuator Position: Front back left or right
Contact Configuration: 1 N.C. & 1 N.O.
Dimensions: 84 x 31 x 31 mm; Plastic Housing -
SI-LS31HGD
Limit Switch: Vertical Hinged lever +/-90 degrees
Actuator Position: Front back left or right
Contact Configuration: 1 N.C. & 1 N.O.
Dimensions: 90 x 31 x 31 mm; Plastic Housing -
SI-LS31HGE
Limit Switch: Vertical Hinged lever +/-90 degrees
Actuator Position: Front back left or right
Contact Configuration: 2 N.C.
Dimensions: 90 x 31 x 31 mm; Plastic Housing -
SI-LS31HGLD
Limit Switch: Left-hand Hinged lever 180 degrees
Actuator Position: Front back left or right
Contact Configuration: 1 N.C. & 1 N.O.
Dimensions: 90 x 31 x 31 mm; Plastic Housing -
SI-LS31HGLE
Limit Switch: Left-hand Hinged lever 180 degrees
Actuator Position: Front back left or right
Contact Configuration: 2 N.C.
Dimensions: 90 x 31 x 31 mm; Plastic Housing -
SI-LS31HGRD
Limit Switch: Right-hand Hinged lever 180 degrees
Actuator Position: Front back left or right
Contact Configuration: 1 N.C. & 1 N.O.
Dimensions: 90 x 31 x 31 mm; Plastic Housing -
SI-LS31HGRE
Limit Switch: Right-hand Hinged lever 180 degrees
Actuator Position: Front back left or right
Contact Configuration: 2 N.C.
Dimensions: 90 x 31 x 31 mm; Plastic Housing -
SI-LS31RTE
Limit Switch: Rotary Shaft
Actuator Position: Front back left or right
Contact Configuration: 2 N.C.
Dimensions: 84 x 31 x 31 mm; Plastic Housing