ED1G Enabling Device

Online Learning Contact a Banner Engineer About Your Application

Overview

A manually operated safety control device which, when continuously activated and used in conjunction with a separate actuating control, will allow the machine to function in manual operating mode.

  • Three-position functionality (OFF-ON-OFF) as required for manual control of a machine
  • Provides safety function when user either squeezes or releases the handlegrip switch
  • Ergonomic design with a detented enable position (position 2)
  • Terminal 1-2 and 3-4 contacts will not re-close when released from fully squeezed (position 3)
  • Ideally suited for use as an enabling device for robotic cells
  • Optional momentary pushbutton switch (depending on model) that can provide hold-to-run, reset, or jogging/inching functions
  • Built-in strain relief and M20x1.5 conduit connection
  • Meets IP65 or IP66, depending on model
  • Insulated device (IEC 60947-5-1) on all models
  • Design meets or exceeds: ANSI RIA R15.06 and ISO 10218 Robot safety standard; ANSI B11.19 Performance Criteria for Safeguards; ANSI NFPA 79 (2007) and IEC 60204-1 (2000) Electrical Requirements for Industrial Machines

Product Specifications

Supply Voltage and Current250V ac/dc
Impulse Withstand Voltage3-position switch: 2.5 kV

Momentary pushbutton: 1.5 kV
Output Contact RatingsSee table on pg. 11 of data sheet.
Rated Thermal Current (Ith):2.5 A*

*For the following operating temperatures:

40°C ≤ 50°C: 2 A ( 4 contacts under load)

50°C ≤ 60°C: 1.5 A ( 3 contacts under load)
Contact Resistance100 mohm max.
Insulation ResistanceLive to dead metal parts: 100 Mohm min.

Positive to negative live parts: 100 Mohm min.
Recommended Wire/Cable SizeWire: 0.14 to 1.5 mm² (25 AWG to 16 AWG)

Cable: ø 7 to 13 mm

M20 conduit
Short Circuit Protection250V / 10A fast blow fuse (IEC 60127-1)

Conditional short circuit current: 50 A (250V)
Vibration ResistanceOperating extremes: 5 to 55 Hz, half amplitude 0.5

mm minimum

Damage limits: 16.7 Hz, half amplitude 1.5 mm minimum
Shock ResistanceOperating extremes:150 m/s² (15 G)

Damage limits: 1,000 m/s² (100 G)
Direct Opening(Terminals 5 and 6 models ED1G-L21SM-1N and ED1G-L21SMB-1N)

Actuating Force: 70 N minimum

Travel: 4.7 mm minimum
Date code formatYYWWX: 2-digit year, 2-digit week, X internal code
Mechanical LifePositions 1 & 2 only: 1,000,000 operations minimum

Positions 1, 2 & 3: 100,000 operations minimum

Operating frequency: 1,200 operations per hour maximum
Electrical Life100,000 operations minimum at rated load
Pollution Degree3
Terminal Pulling Strength20 N minimum
Terminal Screw Torque0.5 to 0.6 Nm
Operating Conditions (indoor use only)Temperature: –10° to +60° C (no freezing)

Humidity: 45 to 85% RH max. (no condensation)

Storage Temperature: –40° to +80° C (no freezing)
ConstructionPolyamide housing and cable gland, NBR/PVC polyblend rubber grip switch boot; model ED1G-L21SM-1N meets IP66; other models meet IP65
Applicable StandardsDesign Standards: IEC 60947-5-1, EN 60947-5-1, JIS

C8201-5-1, UL 508, CSA C22.2 No. 14, GS-ET-22

Application Standards: ISO 12100/EN ISO 12100,

IEC 60204-1/ EN 60204-1, ISO 11161/EN ISO11161,

ISO10218-1/EN ISO10218-1, ANSI/RIA/ISO 10218-1,

ANSI NFPA 79, ANSI/RIA R15.06, ANSI B11.19, ISO

13849-1/EN ISO 13849-1
CertificationsCE, cULus listed, Ind. Cont. Eq. 858T E71083
Ratings approved by Safety AgenciesTÜV rating: AC-15 250V ac 0.5A; DC-13 125V dc

0.1A; Applicable EC Directives: LOW Voltage Directive

(2006/95/EC), Machinery Directive (2006/42/EC); Applicable

EC Standard(s): EN60947-5-1, GS-ET-22

UL, c-UL rating: 250V ac, 0.5A Pilot Duty; 125V dc,

0.1A Pilot Duty, Ambient Temperature +40°C, Environmental

Rating Type 4X, Indoor Use Only. UL has only

investigated this device for shock and fire to UL508.

English

Data Sheets

Document Name Part Number File Size Download
1. ED1G Enabling Device 151822 1.4MB Download

Product Brochures

Document Name Part Number File Size Download
1. F142 Safety Solutions 16 Page - UK English F142-Safety 2.2MB Download

French

Product Brochures

Document Name Part Number File Size Download
1. F142 Safety Solutions 16 Page - French FR-F142-Safety 2.3MB Download

Polish

Product Brochures

Document Name Part Number File Size Download
1. F142 Safety Solutions 16 Page - Polish PL-F142-Safety 2.3MB Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Looking for CAD Files?

Browse by model family or type in your model number to find STEP, IGS, DXF, or PDF files for your project.

Find them now »

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.


Find international distributors