- Sensors
- Miniature Photoelectric Sensors
- Compact Photoelectric Sensors
- Midsize Photoelectric Sensors
- Fullsize Photoelectric Sensors
- Laser Sensors
- Ultrasonic Sensors
- Fiber Optic Sensors
- Part-Sensing Sensors
- Measuring Array Sensors
- Slot Sensors
- Analog Output
- L-GAGE Q50 Series—Analog
- L-GAGE LG5 and LG10 Series
- Analog OMNI-BEAM Series
- U-GAGE S18U Series—Analog
- L-GAGE LT3 Series
- U-GAGE QT50U DC Series—Analog
- U-GAGE T30U—Analog & Discrete
- A-GAGE EZ-ARRAY Series
- D10 Expert with Numeric Display—Analog & Discrete
- L-GAGE LT7 Series
- T-GAGE M18T Series—Analog
- A-GAGE MINI-ARRAY Series Controllers—Discrete/Analog Outputs
- QL55 Series
- U-GAGE T30UX: Analog
- U-GAGE Q45U Series—Analog
- U-GAGE ULTRA-BEAM Series—Analog
- U-GAGE Q45UR Series—Analog
- U-GAGE Sonic OMNI-BEAM Ultrasonic Sensors
- Optical Touch Button
- Temperature Sensors
- Vehicle Detection
- Radar Sensors
- Light Gauging Sensors
- Intrinsically Safe
- True Color Sensors
- Registration Mark Sensors
- Luminescence Sensors
- Remote Amplifier
- High-Pressure, Washdown Rated
- Sensors Accessories
- Machine Safety
- Vision Sensors and Vision Lighting
- Indicator Lights
- Wireless Sensor Networks
U-GAGE S18U Series—Analog
Uses & Applications
Overview
- Offers 10 to 30V dc supply voltage with 4-20 mA or 0-10V dc analog output, depending on model
- Senses from 30 to 300 mm
- Automatically scales the analog output over the width of the programmed sensing window
- Ideal for material handling and packaged goods applications, such as bottling or liquid level detection and control for small containers
- Available in straight or right-angle versions with a wide variety of mounting hardware for enhance sensing versatility
- Compensates for temperature, for greatest sensing accuracy
- Simplifies setup with push-button and remote TEACH-mode programming
- Shows status during setup and operation, using highly visible LEDs indicators
Product Specifications
| Supply Voltage and Current | 10 to 30V dc (10% max. ripple) @ 65 mA max (exclusive of load) |
|---|---|
| Range | 30 to 300 mm |
| Ultrasonic Frequency | 300 kHz
Rep. rate:2.5 milliseconds |
| Supply Protection Circuitry | Protected against reverse polarity and transient overvoltages |
| Output Configuration | 0-10V dc or 4-20 mA, depending on model |
| Output Rating | 10-30V dc voltage models:2.5 k ohms min. load resistance. Minimum supply for a full 10V output is 12V dc (for supply voltages between 10 and 12, V out max is at least V supply -2) 4-20 mA sourcing models:1 k ohms @ 24V dc input Max. load resistance:(Vcc-4)/0.02 ohms
|
| Output Protection | Protected against short circuit conditions |
| Output Response Time | Black wire @ 0-2V dc (or open):30 milliseconds Black wire @ 5-30V dc:2.5 milliseconds |
| Delay at Power-up | 300 milliseconds |
| Linearity | 2.5 milliseconds response:±1 mm 30 milliseconds response:±0.5 mm |
| Resolution | 2.5 milliseconds response:1 mm 30 milliseconds response:0.5 mm |
| Temperature Effect | 0.02% of distance/° C |
| Repeatability | 0.5 mm |
| Minimum Window Size | 5 mm |
| Adjustments | Sensing window limits:TEACH-Mode programming of near and far window limits may be set using the push buttons or remotely using TEACH input. |
| Indicators | Power/Signal Strength (Red/Green): Green:target is within sensing range
Red:target is outside sensing range
OFF:sensing power is OFF
TEACH/Ouput indicator (Yellow/Red):Yellow:target is within taught limits
Red:sensor is in TEACH mode
OFF:target is outside taught window limits
|
| Remote TEACH | Impedance:12 k ohms |
| Construction | Threaded barrel:thermoplastic polyester Push-button housing:ABS/PC Push-button:santoprene Lightpipes:acrylic |
| Environmental Rating | Leakproof design, rated IEC IP7; NEMA 6P |
| Connections | 5-conductor (with drain) 2 m or 9 m shielded PVC-jacketed attached cable, or 5-pin Euro-style quick-disconnect fitting. QD cables are ordered separately. |
| Operating Conditions | Temperature:-20° to +60° C Relative humidity:100% |
| Vibration and Mechanical Shock | All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double amplitude 0.06”, maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave. |
| Temperature Warmup Drift | Less than 1.7% of sensing distance upon power-up |
| Application Note | Objects passing inside the specified near limit may produce a false response. |
Banner Insider eNewsletter
Helpful application information, new product updates, answers to frequently asked questions, and more.
Subscribe Now »New 2010 Product Catalog
The source for all Banner product lines. Features multiple navigation options, applications and product comparisons, and detailed specifications for brackets, cordsets and other accessories.
Get it Now »Worldwide Distributors
Banner has more than 2,000 distributors worldwide — ready to help you.
Find international distributors