Assembly and Robotics Success Stories

  1. LED Lights Illuminate Control Cabinet

    An equipment manufacturer builds test and measurement machinery for the auto industry. Operators access machine systems through the control cabinet. Intense illumination of the cabinet facilitates machine maintenance and management. Multiple AC powered fluorescent light fixtures had been used for this task.

  2. Superior Light Distribution with LEDs

    American Hoffmann Corporation chose WLB32 LED light bars to illuminate work areas, enclosures and control cabinets, replacing fluorescent light fixtures. The superior light distribution offered by the WLB32 LED lights lights, as well as the ease of installation were key factors in the company's decision.

  3. LED Light Bars Outshine Fluorescents, Reduce Machine Build Times & Expenses [Success Story]

    • Bright illumination of work station • Energy and cost savings • Long-lasting LED lights • Easily installed into existing equipment systems

  4. Inspecting Small Connectors

    An automotive supply company makes a range of vehicle systems. Their seating systems combine structure and design with features that enhance comfort and safety. Weight sensors installed on the underside of the seats work in coordination with vehicle safety systems to determine the size and position of a seat occupant. These factors affect how or if airbags will be deployed in the event of an accident.

  5. Sensors to Measure Movement Range

    During assembly, inspections are conducted to measure seat height adjustment, forward and rearward movement, and upright and recline motion. Two sensors are used for each inspection. The sensors are deployed off the conveyor line to ensure easy access to and the free movement of the seats. At its maximum range during inspection, a seat may be as far as a meter away from the sensors.

  6. Remote Monitoring Calculates Machine Run Time

    During normal operation, operators load a welding machine with the frame components to be welded. The customer needed accurate machine run time data to determine why production goals were not being met.

  7. Streamlining Call for Parts or Service

    To improve efficiency, assemblers at work stations need a way to call for parts and service that doesn’t involve them leaving their work stations. Getting parts more quickly would improve production efficiency, and using a system of remote indicators would let the supervisors to see the status of each work station, allowing the supervisors to fix production problems quickly and to collect production metrics.

  8. Communication in a Busy Manufacturing Site

    As more components pass through the oven, keeping pace with the flow of items to be unloaded becomes increasingly difficult. Congestion in the sortation area builds. Items can easily be misdirected or even damaged. A pause in the flow of parts allows the unloading operator to correct mistakes and clear a pickup station. However, the distance between the unloading and loading areas as well as ambient interference from surrounding machinery complicates communication between operators.

  9. Vision Sensor to Read QR Codes

    Prior to installation, engines and transmissions are coupled together on the assembly line. A worker using a hand held bar code reader scans the QR code on each transmission. The codes are small, have minimal quiet zones and are dense with embedded information. Additionally, the bar code readers have a limited range. Combined, these factors made scanning the QR codes difficult, adding time to the assembly process and diverting labor resources.

  10. Presence Detection on Rotating Lathe Turret

    Betty Machine chose the SureCross® DX80 FlexPower® wireless network from Banner Engineering. This versatile, highly-scalable solution is built around a Gateway capable of two-way communication with multiple end-point Nodes.