Fiber Optic Amplifier: DF-G1 Series

DF-G1 Fiber Optic Sensor
1 min  48 secs  1 min  48 secs 
  • Models with IO-Link enable a point-to-point communication link between a master device and a sensor, facilitating remote monitoring, teaching, and configuration
  • Easy to read dual digital displays simultaneously show signal level and threshold
  • Simple user interface ensures easy sensor set-up and programming 
  • Expert TEACH and SET methods ensure optimal gain and threshold for all applications, especially low contrast applications 
  • IO-LINK models available 
  • Models for detection of extraneous light sources available 
  • Response speeds as fast as 200 µs 
  • Thermally stable electronics minimize warm-up drift and reduce the effect of side-by-side mounting of multiple fiber amplifiers 
  • ECO (economy) display mode reduces amplifier power consumption by 25% 
  • Cross talk avoidance algorithm allows two fiber assemblies to operate in close proximity for many applications
DF-G1_io-link_drop-shadow

Technical Literature

Date
Type
Size
DF-G1 Install Sheet
DF-G1 Install Sheet
09/09/15
Installation Guide
679K
DF-G1 Manual
DF-G1 Manual
09/09/15
Product Manual
3.9MB

Software

Date
Type
Size
Banner Sensors Graphical User Interface (GUI) Version 2.0
07/13/12
Software
184.9MB

Marketing Literature

Date
Type
Size
DF-G1 Expert Dual Display Fiber Amplifier Promo Flyer
01/04/12
Product Brochure
586K
DF-G1 liquid level detection
40 secs 

The DF-G1 Expert Dual Display Fiber Amplifier is an easy-to-use fiber optic system that can be set up quickly, reducing installation time. The user interface is intuitive and the amplifier features a dual display screen, indicating the signal level and threshold simultaneously for simple operation. The DF-G1 has minimal warm-up drift, taking only minutes to start up and operate at full performance. It's ideal for leak detection and level control applications.

40 secs 
DF-G1 Product Demonstration
7 mins  34 secs  7 mins  34 secs 
Small Parts Counting
Small Parts Counting

Banner's DF-G1 Series amplifier provides a simple setup and calibration for small part counting applications. Once the amplifier is setup, the easy-to-read digital dual display allows for simple operation because it shows the signal level and threshold simultaneously.

Read More
Pick and Place Machine Leading Edge Detection
Pick and Place Machine Leading Edge Detection

Fiber optics are an ideal solution for pick and place machines because of their small size. DF-G1 amplifiers can be separated from fibers so the operator has easy access to the digital dual-display screen for data monitoring. Additionally, the cross talk avoidance algorithm allows two or more amplifiers to operate in close proximity to each other.

Read More
Window Tint Verification
Window Tint Verification

Banner’s DF-G1 light receiver sensor differentiates between windows with or without tint based on how much external light passes through the glass. The DF-G1 self-contained device has a simple push button set-up for easy adjustment along the conveyor. An intuitive user display allows for immediate sensor feedback.

Read More
Light Receiver Detects Broad Spectrum of Lights
Light Receiver Detects Broad Spectrum of Lights

Banner’s DF-G1 fiber optic light receiver is a unique, cost-effective product that is designed to be placed directly in test equipment to ensure lights are functioning correctly. With the same intuitive dual display and programming interface as other DF-G1 models, the light receiver can be integrated and interfaced with assembly and test equipment control systems for pass/fail inspection.

Read More
Syringe Inspection
Syringe Inspection

The DF-G1 sensor can be easily configured for detection of small targets, such as syringes, in a limited space packaging process. With Banner's powerful TEACH and SET methods, optimal gain and threshold can be used for a range of applications, including low contrast and long range applications.

Read More
Wafer Cassette Detection Under Water
Wafer Cassette Detection Under Water

Silicon wafers are transported from one process to another in cassette on a conveyor that is totally submerged in de-ionized water. A D10 sensor has teflon-encapsulated opposed-mode fibers that are located on either side of the conveyor. When the cassette is present, the opposed beam is broken.

Read More
Product Selection
Loading...

Narrow Results

clear all filters

+- Connection

  • (5)
  • (10)
  • (5)
  • (5)

+- Quick Disconnect Type

  • (5)
  • (10)
  • (10)

+- Output

  • (10)
  • (10)

+- Sensing Beam

  • (10)
  • (15)

+- Special Feature: Remote Teach

  • (5)
  • (20)

+- Minimum response time (ms)

  • (15)
  • (10)

+- Color LED - Amplifiers

  • (15)

+- IO Link

  • (5)
  1. DF-G1-NS-2M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 NPN
    2 m (6.5 ft.) Cable

  2. DF-G1-NS-Q7

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 NPN
    M8 Pico connector, 4-pin

  3. DF-G1-PR-Q5

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver
    Range: Depends on fiber and light source; Input 10 - 30 V dc
    Output: 1 PNP
    M12 Euro 4-pin 150 mm (6 in) Pigtail Connector

  4. DF-G1-PS-2M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 PNP
    2 m (6.5 ft.) Cable

  5. DF-G1-PS-Q5

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 PNP
    M12 Euro 150mm (6 Inch) pigtail connector, 4-pin

  6. DF-G1-PS-Q7

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 PNP
    M8 Pico connector, 4-pin

  7. DF-G1-KS-2M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 18 - 30 V dc
    Output: 1 PNP with IO-Link Communication; 1 PNP
    2 m (6.5 ft.) Cable

  8. DF-G1-KS-9M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 18 - 30 V dc
    Output: 1 PNP with IO-Link Communication; 1 PNP
    9 m (30 ft) Cable

  9. DF-G1-KS-Q3

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 18 - 30 V dc
    Output: 1 PNP with IO-Link Communication; 1 PNP
    M8 Pico 150 mm (6 in) pigtail connector; 4-pin

  10. DF-G1-KS-Q5

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 18 - 30 V dc
    Output: 1 PNP with IO-Link Communication; 1 PNP
    M12 Euro 150 mm (6 in) pigtail connector; 4-pin

  11. DF-G1-KS-Q7

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 18 - 30 V dc
    Output: 1 PNP with IO-Link Communication; 1 PNP
    M8 Pico connector; 4-pin

  12. DF-G1-NR-2M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver
    Range: Depends on fiber and light source; Input 10 - 30 V dc
    Output: 1 NPN
    2 m (6.5 ft) Cable

  13. DF-G1-NR-9M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver Range: Depends on fiber and light source; Input 10 - 30 V dc Output: 1 NPN 9 m (30 ft) Cable

  14. DF-G1-NR-Q3

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver
    Range: Depends on fiber and light source; Input 10 - 30 V dc
    Output: 1 NPN
    M8 Pico 150mm (6 Inch) pigtail connector, 4-pin

  15. DF-G1-NR-Q5

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver
    Range: Depends on fiber and light source; Input 10 - 30 V dc
    Output: 1 NPN
    M12 Euro 4-pin 150 mm (6 in) Pigtail Connector

  16. DF-G1-NR-Q7

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver
    Range: Depends on fiber and light source; Input 10 - 30 V dc
    Output: 1 NPN
    M8 Pico 4-pin Connector

  17. DF-G1-NS-9M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 NPN
    9 m (30 ft.) Cable

  18. DF-G1-NS-Q3

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 NPN
    M8 Pico 150mm (6 Inch) pigtail connector, 4-pin

  19. DF-G1-NS-Q5

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 NPN
    M12 Euro 150mm (6 Inch) pigtail connector, 4-pin

  20. DF-G1-PR-2M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver
    Range: Depends on fiber and light source; Input 10 - 30 V dc
    Output: 1 PNP
    2 m (6.5 ft) Cable

  21. DF-G1-PR-9M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver Range: Depends on fiber and light source; Input 10 - 30 V dc Output: 1 PNP 9 m (30 ft) Cable

  22. DF-G1-PR-Q3

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver
    Range: Depends on fiber and light source; Input 10 - 30 V dc
    Output: 1 PNP
    M8 Pico 4-pin 150 mm (6 in) Pigtail Connector

  23. DF-G1-PR-Q7

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier Light Receiver
    Range: Depends on fiber and light source; Input 10 - 30 V dc
    Output: 1 PNP
    M8 Pico 4-pin Connector

  24. DF-G1-PS-9M

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 PNP
    9 m (30 ft.) Cable

  25. DF-G1-PS-Q3

    logo with r symbol

    DF-G1 Dual Display Fiber Amplifier
    Range: Depends on fiber; Input 10 - 30 V dc
    Output: 1 PNP
    M8 Pico 150mm (6 inch) pigtail connector, 4-pin