D10 Expert with Bargraph Display—Discrete
Overview
High-performance, low-contrast plastic fiber optic sensor with bargraph display
- 10 to 30V dc supply voltage with bipolar NPN or PNP outputs
- Bargraph display of TEACH and signal strength
- Push button for easy-to-set static, dynamic or single-point programming
- Manual adjustment for fine tuning
- Light- or dark-operate selectable
- 500 microsecond response with crosstalk avoidance or high-speed mode of 200 microsecond response with crosstalk avoidance disabled
- Visible red or green sensing beam
Product Specifications
| Supply Voltage and Current | 10 to 30V dc (10% max. ripple) @ less than 45 mA (exclusive of load) |
|---|---|
| Range | Varies by sensing mode and fiber optics used |
| Supply Protection Circuitry | Protected against reverse polarity and transient voltage |
| Output Configuration | Bipolar:One NPN (current sinking) and one PNP (current sourcing) |
| Output Rating | 150 mA max. load
OFF-state leakage current:less than 5 µA @ 30V dc ON-state saturation voltage: NPN:less than 200 mV @ 10 mA; 1V @ 150 mA load
PNP:less than 1V @ 10 mA; 1.5V @ 150 mA load
|
| Output Protection Circuitry | Protected against false pulse on power-up and continuous short-circuit |
| Output Response Time | 500 microseconds (normal mode) or 200 microseconds (high-speed mode) |
| Delay at Power-up | 200 millisecond; outputs do not conduct during this time. |
| Repeatability | 100 microseconds (normal mode) or 66 microseconds (high-speed mode) |
| Adjustments | Two push buttons and remote wire
Push buttons or remote wire:Expert TEACH programming (two-point static, dynamic and single-point static), light operate (LO)/dark operate (DO), OFF-delay and response speed Push button only:Manually adjust (+/-) sensitivity Remote wire only:Push-button lockout |
| Indicators | 8-segment Red bargraph:Light-to-dark signal difference relative to taught condition (single-point TEACH ) Green status indicators:LO, DO, High Speed and OFF-delay Green LED:Power ON Yellow LED:Output conducting |
| Construction | Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover. |
| Environmental Rating | NEMA 1; IEC IP50 |
| Connections | PVC-jacketed 2 m or 9 m 6-wire attached cable or integral 6-pin Pico-style QD. QD cables are ordered separately. |
| Operating Conditions | Temperature:-10° to +55° C Storage Temperature:-20° to +85° C Relative humidity:90% @ 50° C |
| Installation | 35 mm DIN rail or included mounting bracket |
Banner Insider eNewsletter
Helpful application information, new product updates, answers to frequently asked questions, and more.
Subscribe Now »Worldwide Distributors
Banner has more than 2,000 distributors worldwide — ready to help you.
Find international distributors