WORLD-BEAM QS30 Expert Laser

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • 30 mm threaded barrel or right-angle mounting options
  • Available with Class 1 (diffuse or retroreflective models) and Class 2 (diffuse models)
  • 10 to 30V dc supply voltage with bipolar NPN/PNP outputs
  • Visible laser beam for easy alignment and long-range sensing
  • Ideal for diffuse, shiny or limited-contrast targets
  • Push-button TEACH or SET programming
  • Accuracy for diffuse sensing up to 800 mm
  • Long-range (LLP) or high-sensitivity (LLPC) retroreflective models
  • Bright LED operating status indicators visible from 360°

Product Specifications

Supply Voltage and Current10 to 30V dc (10% max. ripple @ 10% duty cycle) @ 35 mA (exclusive of load)
RangeLaser Polarized Retroreflective:0.2 to 18 m, range is specified using one model BRT-36X40BM retroreflector
Laser Diffuse (Class 1):400 mm
Laser Diffuse (Class 2):800 mm
Beam Size ApertureLaser Polarized Retroreflective:Approx. 3 mm
Laser Diffuse:Approx. 2 mm
Supply Protection CircuitryProtected against reverse polarity, over voltage and transient voltages
Output ConfigurationBipolar:One NPN (current sinking) and one PNP (current sourcing); light operate (LO) or dark operate (DO) selectable or configurable, depending on model
Output Rating150 mA max. load OFF-state leakage:less than 10 µA @ 30V dc
ON-State saturation voltage:
NPN:less than 1.0V @ 150 mA load
PNP:less than 2.0V @ 150 mA load
Output Protection CircuitryProtected against output short-circuit, continuous overload, transient over-voltages and false pulse on power-up
Output Response Time500 microseconds
Delay at Power-up1 second max.; outputs do not conduct during this time.
Repeatability70 microseconds
AdjustmentsLaser Polarized Retroreflective:
2 Push Buttons and Remote Wire:Push-button programming; manually adjust (+/-) cutoff; NO/NC or LO/DO and OFF-delay configuration options; and push-button lockout using remote wire
Laser Diffuse:
2 Push Buttons and Remote Wire::Expert TEACH programming (two-point static and single-point static); manually adjust (+/-) cutoff; NO/NC or LO/DO and OFF-delay configuration options; and push-button lockout using remote wire
Indicators8-segment Red bargraph:distance relative to cutoff point (or switch-point for Diffuse)
2 LED indicators on top:Green and Yellow
Green:power ON
Yellow:output conducting
ConstructionPC/ABS housing with acrylic lens cover
Environmental RatingIP67; NEMA 6
Connections5-conductor 2 m or 9 m attached PVC cable, or 4-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
Operating ConditionsTemperature:-10 to +50° C
Relative humidity:90% @ 50° C (non-condensing)
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz max., double amplitude 0.06-inch acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave.

English

Data Sheets

Document Name Part Number File Size Download
1. WORLD-BEAM QS30 Laser Retroreflective Series 112355 833K Download
2. WORLD-BEAM QS30 Laser Diffuse Series 109027 815K Download

Japanese

Product Brochures

Document Name Part Number File Size Download
1. WORLD-BEAM QS30 Laser Sensors Flyer - Japanese JP05 329K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

"No more costly wiring runs"

“I’m delighted with Banner’s SureCross wireless system. It gives us comprehensive monitoring and control in previously inaccessible locations. And it’s easy to expand and relocate as needed.”

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors