| Supply Voltage and Current | 10 to 30V dc (10% max. ripple); less than 70 mA @ 10V dc, 35 mA @ 30V dc (exclusive of load)
|
| Range | 10 mm
|
| Supply Protection Circuitry | Protected against reverse polarity and transient voltages
|
| Output Configuration | Bipolar:One NPN (current sinking) and one PNP (current sourcing)
|
| Output Rating | 100 mA max. each output
OFF-state leakage current:
NPN:less than 200 µA
PNP:less than 10 µA
ON-state saturation voltage:
NPN:less than 200 mV @ 10 mA; less than 1V @ 100 mA
PNP:less than 1.2V @ 10 mA; less than 1.6V @ 100 mA
|
| Output Protection Circuitry | Protected against false pulse on power-up and continuous overload or short circuit of outputs
|
| Output Response Time | 50 microseconds
|
| Delay at Power-up | 1 second; outputs do not conduct during this time.
|
| Repeatability | 15 microseconds
|
| Adjustments | Using push buttons—Dynamic (+) and Static (-):
Manually adjust discrete output switchpoint using + or - buttons
Dynamic TEACH (TEACH on-the-fly) sensitivity adjustment
Static TEACH sensitivity adjustment
Light operate/dark operate
OFF-delay/ON-delay
Using Remote TEACH input (gray wire):
Dynamic TEACH (TEACH on-the-fly) sensitivity adjustment
Static TEACH sensitivity adjustment
Light operate/dark operate
OFF-delay/ON-delay
Lockout of push buttons for security
|
| Indicators | 8-segment LED light bar:Red signal strength indicator relative to taught signal level; higher segment number for higher measured sensing contrast
Green ON steady:power to sensor is ON
Yellow ON steady:output ON
LO Green ON steady:light operate
DO Green ON steady: dark operate
ON-delay Green ON steady:ON-delay
OFF-delay Green ON steady:OFF-delay
|
| Construction | Housing:zinc alloy diecast with black painted finish and o-ring sealed lens and lens port cap
Lens:acrylic
Lens port cap and lens holder:ABS
Push buttons:thermoplastic elastomer
Labels:polycarbonate
|
| Environmental Rating | IP67; NEMA 6
|
| Connections | 2 m or 9 m 5-wire attached PVC cable with internal strain relief, or 150 mm pigtail with 5-pin Euro-style quick-disconnect fitting. QD cable are ordered separately.
|
| Operating Conditions | Temperature:-10 to +55° C
Relative humidity:90% @ 50° C (non-condensing)
|
| Vibration and Mechanical Shock | All models meet IEC 68-2-6 and IEC 68-2-27 testing criteria
|
| Application Notes | • Do not mount the sensor directly perpendicular to shiny surfaces; position it at approximately a 15° angle in relation to the sensing target.
• Minimize web or product flutter whenever possible to maximize sensing reliability.
|