WORLD-BEAM QS30 Expert Laser

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • 30 mm threaded barrel or right-angle mounting options
  • Available with Class 1 (diffuse or retroreflective models) and Class 2 (diffuse models)
  • 10 to 30V dc supply voltage with bipolar NPN/PNP outputs
  • Visible laser beam for easy alignment and long-range sensing
  • Ideal for diffuse, shiny or limited-contrast targets
  • Push-button TEACH or SET programming
  • Accuracy for diffuse sensing up to 800 mm
  • Long-range (LLP) or high-sensitivity (LLPC) retroreflective models
  • Bright LED operating status indicators visible from 360°

Product Specifications

Supply Voltage and Current10 to 30V dc (10% max. ripple @ 10% duty cycle) @ 35 mA (exclusive of load)
RangeLaser Polarized Retroreflective:0.2 to 18 m, range is specified using one model BRT-36X40BM retroreflector
Laser Diffuse (Class 1):400 mm
Laser Diffuse (Class 2):800 mm
Beam Size ApertureLaser Polarized Retroreflective:Approx. 3 mm
Laser Diffuse:Approx. 2 mm
Supply Protection CircuitryProtected against reverse polarity, over voltage and transient voltages
Output ConfigurationBipolar:One NPN (current sinking) and one PNP (current sourcing); light operate (LO) or dark operate (DO) selectable or configurable, depending on model
Output Rating150 mA max. load OFF-state leakage:less than 10 µA @ 30V dc
ON-State saturation voltage:
NPN:less than 1.0V @ 150 mA load
PNP:less than 2.0V @ 150 mA load
Output Protection CircuitryProtected against output short-circuit, continuous overload, transient over-voltages and false pulse on power-up
Output Response Time500 microseconds
Delay at Power-up1 second max.; outputs do not conduct during this time.
Repeatability70 microseconds
AdjustmentsLaser Polarized Retroreflective:
2 Push Buttons and Remote Wire:Push-button programming; manually adjust (+/-) cutoff; NO/NC or LO/DO and OFF-delay configuration options; and push-button lockout using remote wire
Laser Diffuse:
2 Push Buttons and Remote Wire::Expert TEACH programming (two-point static and single-point static); manually adjust (+/-) cutoff; NO/NC or LO/DO and OFF-delay configuration options; and push-button lockout using remote wire
Indicators8-segment Red bargraph:distance relative to cutoff point (or switch-point for Diffuse)
2 LED indicators on top:Green and Yellow
Green:power ON
Yellow:output conducting
ConstructionPC/ABS housing with acrylic lens cover
Environmental RatingIP67; NEMA 6
Connections5-conductor 2 m or 9 m attached PVC cable, or 4-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
Operating ConditionsTemperature:-10 to +50° C
Relative humidity:90% @ 50° C (non-condensing)
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz max., double amplitude 0.06-inch acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave.

English

Data Sheets

Document Name Part Number File Size Download
1. WORLD-BEAM QS30 Laser Retroreflective Series 112355 833K Download
2. WORLD-BEAM QS30 Laser Diffuse Series 109027 815K Download

Japanese

Product Brochures

Document Name Part Number File Size Download
1. WORLD-BEAM QS30 Laser Sensors Flyer - Japanese JP05 329K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Looking for CAD Files?

Browse by model family or type in your model number to find STEP, IGS, DXF, or PDF files for your project.

Find them now »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors