On-Axis Lights

Online Learning Contact a Banner Engineer About Your Application

Overview

On-axis vision lighting provides even, diffused illumination for flat, reflective surfaces. A beam splitter directs the light rays along the same axis as the camera lens. Reflective surfaces perpendicular to the camera appear bright. Surfaces at an angle to the camera and non-reflective surfaces appear dark.

  • Connects directly to PresencePLUS vision sensors or an external power supply
  • Evenly illuminates flat reflective surfaces
  • Delivers collimated illumination in the same optical path as camera
  • Standard lights: Available in 100 x 100 mm or 50 x 50 mm light sizes with a 24V dc supply voltage
  • Specialty lights: Available in 25 or 75mm diameter light sizes with 12 or 24V dc supply voltage, depending on model
  • Offers choice of models with infrared or visible red, green, white or blue lights, all with continuous or strobed operation
  • Features models with antireflective glass dust covers
  • Provides minimum useful life of 10,000 to 60,000 hours, depending on model

Product Specifications

IlluminationLED.O100M and LED.O50M models:diffused on-axis light; continuous or strobed operation is selectable using sensor software.
LED.O75N and LED.O25N models:continuous diffused or strobed diffused, depending on model
Supply Voltage and CurrentLED.O100M and LED.O50M models:24V dc ±10% @ 500 mA max.; voltage supplied by PresencePLUS P4 sensors, if operating at 24V dc.
LED.O75N and LED.O25N models:
LED..N, LED..N-D, LED..N-H models:12V dc ±10% with voltage regulation of ±1%
LED..N-S models:24V dc ±10% with voltage regulation of ±1%
Light Source and WavelengthLEDRO100M and LEDRO50M models:visible red, 630 nm
LEDWO100M and LEDWO50M models:visible white, 5500 K
LEDBO100M and LEDBO50M models:visible blue, 470 nm
LEDGO100M and LEDGO50M models:visible green, 530 nm
LEDIO100M and LEDIO50M models:infrared, 850 nm
LEDWO100N model:visible white, 6500 K
LEDRO75N-H model:visible red, 660 nm
LEDBO75N model:visible blue, 470 nm
LEDWO75N and LEDWO75N-S models:visible white, 6500 K
LEDRO75N and LEDRO75N-S models:visible red, 640 nm
LEDWO25N models:visible white, 6500 K
LEDBO25N models:visible blue, 460 nm
LEDRO25N models:visible red, 640 nm
ConnectionsLED.O100M and LED.050M models:300 mm pigtail with 3-pin male Pico-style quick-disconnect fitting. QD cables are ordered separately
LED.O75N and LED.O25N models:0.5 m attached cable terminated with 9-pin D-sub connector (male pins)
LED.50N-S and LED.O75N-S models:1.8 m attached cable terminated with 9-pin D-sub connector (male pins)
ConstructionLEDRO100M and LEDRO50M models:
Housing:black anodized aluminum
Beam splitter:optical glass with optical coatings on both sides
Diffuser:high-percision cast acrylic
Dust cover:optical glass with broadband anti-reflective coating (425 - 675 nm) (some models)
LED.O75N and LED.O25N models:black anodized aluminum
Useful LifeLED.O100M and LED.O50M models:When operated within specifications, output will decrease less than 20% after 10,000 hours and less than 30% after 20,000 hours (based on continuous operation).
LED.O75 and LED.O40 models:actual useful life of strobed lights depends on duty cycle
LEDRO75N, LEDWO25N, LEDRO25N and LEDBO25N models:60,000 hours
LEDWO75N and LEDBO75N models:50,000 hours
Operating ConditonsTemperature:
LED.O100M and LED.O500M models:0° to +50° C
LED.O100, LED.O75, LED.O50 and LED.O25 models:0° to +40° C
Relative humidity:
LED.O100M and LED.O50M models:90% @ 50° C (non-condensing)
LED.O75 and LED.O25 models:95% @ 40° C (non-condensing)
Cleaning InstructionsLED.O100M and LED.O50M models:Regularly remove any dust, dirt or fingerprints from the light source. Blow off dust using anti-static compressed air or if necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use any other chemicals for cleaning.
Installation NoteLED.O100M and LED.O50M models:Before installing an on-axis light, it is recommended that the listed ambient light filter be used
LED.O100M models:50 x 50 mm suggested field of view and 25 mm minimum suggested stand off
LED.O50M models:25 x 25 mm suggested field of view and 25 mm minimum suggested stand off

English

Data Sheets

Document Name Part Number File Size Download
1. On-Axis Lights , White, Red, Blue, Green or Infrared, Diffused, 50 mm 126059 416K Download
2. Specialty On-Axis Lights, White, Blue, or Red, Diffused, 75 mm 67439 123K Download
3. Specialty On-Axis Lights, White, Red or Blue, Diffused, 25 mm, 12V dc 67437 41K Download

French

Data Sheets

Document Name Part Number File Size Download
1. On-Axis Lights , White, Red, Blue, Green or Infrared, Diffused, 100 mm, 24V dc
(Pro Only) - French		 FD183 619K Download

German

Data Sheets

Document Name Part Number File Size Download
1. On-Axis Lights , White, Red, Blue, Green or Infrared, Diffused, 100 mm, 24V dc
(Pro Only) - German		 GD183 606K Download

Italian

Data Sheets

Document Name Part Number File Size Download
1. On-Axis Lights , White, Red, Blue, Green or Infrared, Diffused, 100 mm, 24V dc
(Pro Only) - Italian		 ID183 605K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Looking for CAD Files?

Browse by model family or type in your model number to find STEP, IGS, DXF, or PDF files for your project.

Find them now »

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.


Find international distributors