Industrial Wireless I/O Legacy Products

Legacy products include initial release products that have been replaced by devices with higher I/O counts.

Data Radios

Model Frequency Data Sheet
DX80DR9M 900 MHz, 1 Watt 132031 (American English)
ID199 (Italian)
FD199 (French)
DX80DR2M 2.4 GHz, 100 mW

DX80 Products

These DX80 legacy products include some initial release products that have been replaced by devices with a higher I/O count. For example, the four inputs/four outputs models were replaced by six input/six output models for both the Gateway and Node.

Gateways

Model Frequency Base I/O Data Sheet
DX80G9M6S4P4 900 MHz IP67 Discrete: Four inputs, four outputs 131291
DX80G2M6S4P4 2.4 GHz
DX80G9M6S2P2M2M2 900 MHz IP67 Discrete: Two inputs, two outputs
Analog: Two inputs, two outputs (0-20 mA).		 131292
DX80G2M6S2P2M2M2 2.4 GHz
DX80G9M6S6P6ZP 900 MHz IP67 This M-GAGE Gateway is DIP switch configurable, works with M-GAGE Nodes.
There are two discrete inputs, two discrete inputs mapped to baseline two M-GAGE Nodes, two discrete outputs, and two link loss outputs mapped to two M-GAGE Nodes in the standard base with internal terminal blocks. 		139075
DX80G9M6S6P6ZPC IP20
DX80G2M6S6P6ZP 2.4 GHz IP67
DX80G2M6S6P6ZPC IP20

FlexPower Gateways

Model Frequency I/O Data Sheet
DX80G9M2S 900 MHz The FlexPower Gateway is designed to be powered by 10-30V dc, a battery pack, or the solar powered system with rechargeable batteries. 142679
DX80G2M2S 2.4 GHz

Nodes

Model Frequency Base I/O Data Sheet
DX80N9X6S4P4 900 MHz IP67 Discrete: Four inputs, four outputs 131293
DX80N2X6S4P4 2.4 GHz
DX80N9X6S2P2M2M2 900 MHz IP67 Discrete: Two inputs, two outputs
Analog: Two inputs, two outputs (0-20 mA)		 131295
DX80N2X6S2P2M2M2 2.4 GHz

Configured Kits

Model Number I/O
Kits with Discrete I/O
DX80K*M6DP1 One Gateway and one Node: The four discrete inputs on the Gateway are mapped to the four discrete outputs on the Node. The four discrete inputs on the Node are mapped to the four discrete outputs on the Gateway. datasheet 129306
DX80K*M6DP2 One Gateway and two Nodes: The four discrete inputs on the Gateway are split, two each, to each of the two Nodes' outputs. The two discrete inputs on each Node are mapped to the four discrete outputs on the Gateway. All unused inputs or outputs are disabled. datasheet 129307
DX80K*M6DP4 One Gateway and four Nodes: The four discrete inputs on the Gateway are mapped, one to each of the four Nodes. One discrete input from each Node is mapped to the four discrete outputs on the Gateway. All unused inputs or outputs are disabled. datasheet 129308
DX80K*R6DP1 One Gateway (acting as an I/O repeater) and two Nodes: The four discrete inputs from each Node are mapped to the four discrete outputs on the other Node. datasheet 129310
DX80K*R6DP2 One Gateway (acting as an I/O repeater) and three Nodes: The four discrete inputs from one Node are split, two each, to the other two Nodes' outputs. Two discrete inputs from two Nodes are mapped to the four discrete outputs on the remaining Node. All unused inputs or outputs are disabled. datasheet 129311
DX80K*R6DP4 One Gateway (acting as an I/O repeater) and five Nodes: The four discrete inputs from one Node are split between each of the remaining Nodes' discrete outputs. One discrete input from each of the four Nodes is mapped to the four discrete outputs on the other Node. datasheet 129314
Kits with Mixed I/O
DX80K*M6MP1 One Gateway and one Node: The two discrete inputs and two analog inputs on the Gateway are mapped to the two discrete outputs and two analog outputs for the Node. The Node's two discrete inputs and two analog inputs are mapped to the two discrete outputs and two analog outputs on the Gateway. datasheet 129312
DX80K*M6MP2 One Gateway and two Nodes: One discrete input and one analog input are mapped from the Gateway to each Node's discrete and analog outputs. One discrete input and one analog input from each Node is mapped to the Gateway's two discrete outputs and two analog outputs. All unused inputs or outputs are disabled. datasheet 129313
DX80K*R6MP1 One Gateway (acting as an I/O repeater) and two Nodes: The two discrete inputs and two analog inputs from each Node are mapped to the two discrete outputs and two analog outputs on the other Node. datasheet 129316
DX80K*R6MP2 One Gateway (acting as an I/O repeater) and three Nodes: The two discrete inputs and two analog inputs on one Node are split between the one discrete output and one analog output on each of the remaining Nodes. One discrete inputs and one analog input from each of the other two Nodes are mapped to the two discrete outputs and two analog outputs of the one Node. All unused inputs or outputs are disabled. datasheet 129317

DX99 Dual Chamber Metal Housings

The I/O and specifications for the dual chamber metal housings models are the same as for the single chamber models. Access the single chamber metal housing datasheets listed below for I/O and configuration information. For installation, dimensions, and wiring information specific to the dual chamber metal housing models, refer to this DX99 Dual Chamber Metal Housing Installation Guide.

DX99 FlexPower Node with the Dual Chamber Metal Housing

Model Frequency Boost Power I/O Single Chamber Data Sheet
DX99N9X1S2N0M2X0B1 900 MHz 10V Discrete: Two inputs
Analog: Two inputs (0-20 mA)		 142497
DX99N9X1S2N0M2X0B2 18V
DX99N9X1S2N0V2X0B1 10V Discrete: Two inputs
Analog: Two inputs (0-10V)
DX99N9X1S2N0V2X0B2 18V
DX99N2X1S2N0M2X0B1 2.4 GHz 10V Discrete: Two inputs
Analog: Two inputs (0-20 mA)
DX99N2X1S2N0M2X0B2 18V
DX99N2X1S2N0V2X0B1 10V Discrete: Two inputs
Analog: Two inputs (0-10V)
DX99N2X1S2N0V2X0B2 18V
DX99N9X1S2N0T4X0B0 900 MHz n/a Thermocouple: Three inputs, one thermistor input
Discrete: Two (NPN) inputs		 142681
DX99N2X1S2N0T4X0B0 2.4 GHz
DX99N9X1S0N0R4X0B0 900 MHz RTD: Four inputs 142682
DX99N2X1S0N0R4X0B0 2.4 GHz
DX99N9X1S2N0B2X0B0 900 MHz n/a Bridge: Two inputs
Discrete: Two inputs		 151611
DX99N2X1S2N0B2X0B0 2.4 GHz

To order the internal antenna models, replace the "S" as the 9th digit with a "W." Internal antennas require an additional week for manufacture and shipping. For example, DX99N9X1S2N0M2X0B1 is the model with the external antenna and DX99N9X1W2N0M2X0B1 is the internal antenna model.

DX91 Products

The DX91 product line is certified for operation in Class I, Division 2, Hazardous Locations when installed in accordance with the National Electrical Code, the Canadian Electrical Code, or applicable local codes/regulations.

DX91 Class I, Division 2 (For Hazardous Locations) Control Drawings: 134217

DX91 Gateway for Hazardous Locations

Gateways

Model Frequency I/O Data Sheet
DX91G9M6S4P4M2M2 900 MHz Discrete: Four inputs, four outputs
Analog: Two inputs, two outputs (0-20 mA)		 134860
DX91G2M6S4P4M2M2 2.4 GHz
DX91G9M6S0P0M4M4 900 MHz Analog: Four inputs, four outputs (0-20 mA) 141254
DX91G2M6S0P0M4M4 2.4 GHz
DX91G9M6S8P4 900 MHz Discrete: Eight inputs, four outputs 142551
DX91G2M6S8P4 2.4 GHz
DX91G9M6S4P8 900 MHz Discrete: Four inputs, eight outputs 142552
DX91G2M6S4P8 2.4 GHz
DX91G9M6S6P6 900 MHz Discrete: Six inputs, six outputs 142553
DX91G2M6S6P6 2.4 GHz

To order the internal antenna models, replace the "S" as the 9th digit with a "W." Internal antennas require an additional week for manufacture and shipping. For example, DX91G9M6S4P4M2M2 is the model with the external antenna and DX91G9M6W4P4M2M2 is for the internal antenna model.

Nodes

Model Frequency I/O Data Sheet
DX91N9X6S4P4M2M2 900 MHz Discrete: Four inputs, four outputs
Analog: Two inputs, two outputs (0-20 mA)		 134861
DX91N2X6S4P4M2M2 2.4 GHz
DX91N9X6S0P0M4M4 900 MHz Analog: Four inputs, four outputs (0-20 mA) 141255
DX91N2X6S0P0M4M4 2.4 GHz
DX91N9X6S8P4 900 MHz Discrete: Eight inputs, four outputs 142554
DX91N2X6S8P4 2.4 GHz
DX91N9X6S4P8 900 MHz Discrete: Four inputs, eight outputs 142555
DX91N2X6S4P8 2.4 GHz
DX91N9X6S6P6 900 MHz Discrete: Six inputs, six outputs 142556
DX91N2X6S6P6 2.4 GHz

To order the internal antenna models, replace the "S" as the 9th digit with a "W." Internal antennas require an additional week for manufacture and shipping. For example, DX91N9X6S4P4M2M2 is the model with the external antenna and DX91N9X6W4P4M2M2 is for the internal antenna model.

FlexPower Nodes for K50 EZ-LIGHTs

The FlexPower EZ-LIGHT Nodes are designed to work specifically with the special low-power K50 EZ-LIGHT models and have a 3.6V Lithium D cell integrated into the Node's housing.

Model Frequency I/O Data Sheet
DX80N9X1W1K3 900 MHz One sinking or sourcing (selectable) input, three NMOS sinking outputs and an internal antenna 137526
DX80N2X1W1K3 2.4 GHz

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

"No more costly wiring runs"

“I’m delighted with Banner’s SureCross wireless system. It gives us comprehensive monitoring and control in previously inaccessible locations. And it’s easy to expand and relocate as needed.”

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors