Wireless Nodes with Analog I/O
These Nodes are available with analog I/O only and require 10-30V dc power.
Models ending in C use external terminal blocks instead of internal terminal blocks. These "C" models are Class I, Division 2 certified when installed in a suitable enclosure. Certifications are listed on the Classified Areas page.
| The standard IP67 base with internal terminal blocks | The low-profile IP20 base with external terminal blocks. |
| Model |
Frequency
|
Base
|
I/O | Data Sheet |
| DX80N9X6S0P0M4M4 |
900 MHz
|
IP67
|
Four 0-20 mA inputs, four 0-20 mA outputs | 134322 |
| DX80N9X6S0P0M4M4C | IP20 | |||
| DX80N2X6S0P0M4M4 |
2.4 GHz
|
IP67 | ||
| DX80N2X6S0P0M4M4C | IP20 | |||
| DX80N9X6S0P0V4V4 | 900 MHz | IP67 | Four 0-10V inputs, four 0-10V outputs | 136326 |
| DX80N9X6S0P0V4V4C | IP20 | |||
| DX80N2X6S0P0V4V4 | 2.4 GHz | IP67 | ||
| DX80N2X6S0P0V4V4C | IP20 |
To order the internal antenna models, replace the "S" as the 9th digit with a "W." Internal antennas require an additional week for manufacture and shipping. For example, DX80N9X6S0P0M4M4 is the external antenna and DX80N9X6W0P0M4M4 is the internal antenna.
Banner Insider eNewsletter
Helpful application information, new product updates, answers to frequently asked questions, and more.
Subscribe Now »"No more costly wiring runs"
“I’m delighted with Banner’s SureCross wireless system. It gives us comprehensive monitoring and control in previously inaccessible locations. And it’s easy to expand and relocate as needed.”
Worldwide Distributors
Banner has more than 2,000 distributors worldwide — ready to help you.
Find international distributors