Contact a Banner Engineer
About Your Application

Products for Hazardous Areas

DX99 Models

The DX99 FlexPower® Nodes are certified for use in a variety of hazardous locations and come in two housing types: polycarbonate or metal. The polycarbonate DX99 FlexPower Nodes must be powered by the DX81H Battery Module (sold separately). The DX99 FlexPower Nodes inside a metal housing are powered by a lithium "D" cell integrated into the housing.

  • State-of-the-art combination of wireless communication, battery technology, and intrinsically safe electronics
  • Discrete, analog, and temperature input types are available
  • Battery-based power supply provides power for third-party 4-20 mA and NAMUR process sensors
  • Metal housing devices include a 3.6V D cell lithium battery integrated into the housing
  • Polycarbonate housing devices require the DX81H Battery Module

To simplify the certifications, we have created a reference guide that lists all CSA and ATEX certifications by model, defines the environments, and explains the codes used on ATEX certificates. Refer to the 3D Models page to download AutoCAD, STEP, IGES, and PDF models.

Control Drawings: 141513

CSA Certificate of Compliance

ATEX Certificate of Compliance

DX99 Single Chamber Metal Housings

DX99 FlexPower Node with Metal Housing

Certified for operation in the following locations: 

  • Class I, Division 1, Groups A, B, C, D
  • Class II, Division 1, Groups E, F, G
  • Class III, Division 1
  • Zone 0 (Group IIC) and Zone 20 (Group II)

Model Frequency Boost Power I/O Datasheet
DX99N9X1S2N0M2X0D1 900 MHz 10 V Discrete: Two inputs
Analog: Two inputs (0-20 mA)
142497
DX99N9X1S2N0M2X0D2 18 V
DX99N9X1S2N0V2X0D1 10 V Discrete: Two inputs
Analog: Two inputs (0-10 V)
DX99N9X1S2N0V2X0D2 18 V
DX99N2X1S2N0M2X0D1 2.4 GHz 10 V Discrete: Two inputs
Analog: Two inputs (0-20 mA)
DX99N2X1S2N0M2X0D2 18 V
DX99N2X1S2N0V2X0D1 10 V Discrete: Two inputs
Analog: Two inputs (0-10 V)
DX99N2X1S2N0V2X0D2 18 V
DX99N9X1S2N0T4X0D0 900 MHz n/a Thermocouple: Three inputs, one thermistor input
Discrete: Two (NPN) inputs
142681
DX99N2X1S2N0T4X0D0 2.4 GHz
DX99N9X1S0N0R4X0D0 900 MHz RTD: Four inputs 142682
DX99N2X1S0N0R4X0D0 2.4 GHz
DX99N9X1S2N0B2X0D0 900 MHz n/a Bridge: Two inputs
Discrete: Two inputs
151611
DX99N2X1S2N0B2X0D0 2.4 GHz
DX99N9X1S1S0V2X0D4 900 MHz 13 V Inputs (Modbus Mode): One RS-485
Inputs (Voltage Mode): Two analog, one discrete
159408
DX99N2X1S1S0V2X0D4 2.4 GHz
DX99N9X1S1N0M3X0D5 900 MHz 19 V

Inputs: One analog input with a 29 second warm-up time; one sinking discrete

Additional Input Configurations: One 3-wire 100-Ohm Platinum RTD, one sinking discrete, and two analog (0-20 mA)

159409
DX99N2X1S1N0M3X0D5 2.4 GHz

To order the internal antenna models, replace the "S" as the 9th digit with a "W." Internal antennas require an additional week for manufacture and shipping. For example, DX99N9X1S2N0M2X0D1 is the model with the external antenna and DX99N9X1W2N0M2X0D1 is the internal antenna model.

DX99 Polycarbonate Housings

DX99 FlexPower Node with Polycarbonate Housing

Certified for operation in the following locations: 

  • Class I, Division 1, Groups A, B, C, D
  • Zone 0 (Group IIC)

Model Frequency Boost Power I/O Datasheet
DX99N9X2S2N0M2X0A1 900 MHz 10 V Discrete: Two discrete inputs
Analog: Two analog inputs (0-20 mA)
142496
DX99N9X2S2N0M2X0A2 18 V
DX99N9X2S2N0V2X0A1 10 V Discrete: Two discrete inputs
Analog: Two analog inputs (0-10 V)
DX99N9X2S2N0V2X0A2 18 V
DX99N2X2S2N0M2X0A1 2.4 GHz 10 V Discrete: Two discrete inputs
Analog: Two analog inputs (0-20 mA)
DX99N2X2S2N0M2X0A2 18 V
DX99N2X2S2N0V2X0A1 10 V Discrete: Two discrete inputs
Analog: Two analog inputs (0-10 V)
DX99N2X2S2N0V2X0A2 18 V
DX99N9X2S2N0T4X0A0 900 MHz n/a Thermocouple: Three thermocouple inputs, one thermistor input
Discrete: Two discrete inputs
142498
DX99N2X2S2N0T4X0A0 2.4 GHz
DX99N9X2S0N0R4X0A0 900 MHz RTD: Four inputs 142499
DX99N2X2S0N0R4X0A0 2.4 GHz

To order the internal antenna models, replace the "S" as the 9th digit with a "W." Internal antennas require an additional week for manufacture and shipping. For example, DX99N9X2S2N0M2X0A1 is the model with the external antenna and DX99N9X2W2N0M2X0A1 is the internal antenna model.

 

SureCross® DX80...C Models

The DX80...C designation refers to the model number. Any model number ending in C identifies the IP20 housing style with external terminal blocks. The 900 MHz and 2.4 GHz communication frequencies accommodate world-wide communication standards and allow users to access hard-to-reach locations where wiring and conduit are not practical.

The DX80...C models are enclosure-ready IP20 housings with external terminal strips for easy wiring and installation. All DX80 Gateway and Node I/O options are available in this low-profile housing except the integrated battery models.

These models are certified for operation in the following Hazardous Locations (when installed in a suitable enclosure): 

  • Class I, Division 2, Group A, B, C, D
  • Zone 2 (Group IIC)

Find our DX80...C housing models listed on the individual Gateway and Node product pages.

To simplify the certifications, we have created a reference guide that lists all CSA and ATEX certifications by model, defines the environments, and explains the codes used on ATEX certificates. Refer to the 3D Models page to download AutoCAD, STEP, IGES, and PDF models.

Control Drawings: 143086

CSA Certificate of Compliance

ATEX Certificate of Compliance

 

 

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Banner Enhances Mobile Site

m.bannerengineering.com »
  • Search by part/model number
  • Easily locate distributors in your area
  • Share data from your phone or tablet

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.


Find international distributors