Universal Input Safety Modules

UM_Module_Dim

  • Monitors a wide variety of safety and non-safety input devices:
    • Optical-based safeguarding devices, such as Safety Laser Scanners
      • Positive-opening safety switches used for guard interlocking
        • Emergency-stop devices, such as palm buttons and rope/cable pulls
        • Standard sensors for non-safety applications, such as photoelectric monitoring position or end-of-travel
      • The safety inputs can monitor:
        • +24V dc solid-state (PNP) outputs in single-channel or dual-channel hookup
          • +24V dc source that is switched by hard/relay contacts in single-channel or dual-channel hookup
          • Standard sensors for non-safety applications, such as photoelectric monitoring position or end-of-travel
        • Tb>UM-FA-9A: Three normally open (N.O.) output switching channels for connection to control-reliable power interrupt circuits
        • UM-FA-11A: Two normally open (N.O.) and one normally closed (N.C.) output switching channels for connection to control-reliable power interrupt circuits
        • Automatic reset or monitored manual reset, depending on hookup
        • Design complies with Category 4 PLe (ISO 13849-1), SIL 3 (IEC 61508/IEC 62061), and Control Reliable (ANSI B11.19)
        • Safety Integrity Level (SIL) 3 (IEC 61508/62061)
        • Performance level (PL) e (ISO 13849-1)
        • For use in functional stop category 0 applications per ANSI NFPA 79 and IEC/EN 60204-1

    Technical Literature

    Date
    Type
    Size
    UM-FA-..A Universal Input Safety Module
    09/21/16
    Datasheet
    620K

    Product Selection
    Loading...

    Narrow Results

    clear all filters

    +- Output Configuration

    • (1)
    • (1)
    1. UM-FA-11A

      logo with r symbol

      UM-FA-11A 22.5mm UNVRSL MODULE CNTCT/SLD ST IN 2NO & 1NC OU

    2. UM-FA-9A

      logo with r symbol

      UM-FA-9A 22.5mm UNIVRSL MODULE CNTCT/SLD ST IN 3NO OUT