Relè per tappeti di sicurezza sensibili alla pressione
- Monitors a single mat or a series of connected mats
- Uses a standard 4-wire safety mat or edge triggered by a short in a contact plate or strip
- Offers choice of 115V ac/24V dc or 230V ac/24V dc supply voltage, depending on model
- Provides four normally open (NO) immediate safety outputs rated at 6 amps
- Includes one normally closed (NC) and two solid-state non-safety auxiliary outputs
- Features removable terminal blocks
- Resets automatically or manually
- Responds in 50 millisecond
- Meets US and international standards
- Rated IEC IP20 NEMA 1
- Esegue il monitoraggio di una singola pedana o di più pedane collegate
- Utilizza una pedana di sicurezza standard a 4 conduttori o con intervento a fine fase attivato da un corto in una piastrina o striscia di contatto
- Disponibile con tensione di alimentazione 115 Vca/24 Vcc o 230 Vca/24 Vcc, in base al modello
- Quattro uscite di sicurezza immediate normalmente aperte (NA) con portata 6A
- Integra un'uscita ausiliaria non di sicurezza normalmente chiusa (NC) e due a stato solido
- Completo di morsettiere estraibili
- Reset automatico o manuale
- Tempo di risposta 50 millisecondi
- Conforme agli standard US e internazionali
- Grado di protezione IEC IP20, NEMA 1
Download
Letteratura tecnica
Data
Tipo
Dimensione
Brochure e Cataloghi
Data
Tipo
Dimensione
Data
Tipo
Dimensione
Selezione prodotto
Filtri selezionati
-
SM-GA-5A
Safety Relay Module for Safety Mats
Supply Voltage: 115 V ac or 12-24 V dc
Safety Input: 4-Wire Safety Mat
Safety Output: 4 NO, 6 A; Aux Output: 1 NC, 5 A and 2 Solid-State, 100 mA
Terminal Block: Removable; Width: 45 mm
Self-Checking Circuitry, Auto/Manual Reset, EDM -
SM-HA-5A
Safety Relay Module for Safety Mats
Supply Voltage: 230 V ac or 12-24 V dc
Safety Input: 4-Wire Safety Mat
Safety Outputs: 4 NO, 6 A; Aux Output: 1 NC, 5 A and 2 Solid-State, 100 mA
Terminal Block: Removable; Width: 45 mm
Self-Checking Circuitry, Auto/Manual Reset, EDM