• 戻る

    • Improving Detection of Surface Imperfections with Green LED Lighting

    Green-Hood inspection

    Application: Enhance visibility of surface imperfections on manufacturing materials

    Challenges: Ambient and white light provide insufficient contrast for defect detection

    Solution: Green industrial LED task lighting

    Benefits: Improved contrast and long-lasting, affordable illumination 

    To help prevent poor quality products from being distributed to customers, it is important for companies to inspect products before they leave the manufacturing plant. Ambient and overhead white light does not provide sufficient contrast for surface inspections of objects. When inspecting metal or plastic surfaces in these conditions, imperfections such as fingerprints, dirt, or damaged areas can easily be overlooked. Materials that are shipped with these flaws may require additional repair or recall, which would then drive up unwanted expenses.

    Description

    Green wavelengths are easiest for the human eye to see and adding green lights into the inspection area helps maximize the effectiveness of metal, glass, and plastic inspections. Adding green lighting into this type of work area yields higher contrast compared to white or ambient light. This higher contrast makes the defects more visible to the human eye.

    Even some oils react more to bright green lights, making the flawed oil spots more visible. This is especially important in the automotive industry where oil residue on metalized paint can make fisheye imperfections, which are small circular spots that appear on contaminated surfaces.

    Green task lighting can be difficult to find. Fortunately, Banner Engineering offers an assortment of LED products available in green, such as the WLB92, WLS28-2, WLS27, and WLA task lights. Using LED lighting on factory floors offers many advantages. The various rugged light fixtures offer high quality and low power illumination with the capability to be installed and rotated at different angles to better accommodate the needs of the operator. They have an estimated lifespan of over 50,000 hours and will never require replacement bulbs or ballasts, providing years of maintenance-free illumination. 

    Featured Products

    WLB92大型高輝度LEDワークライト
    WLB92大型高輝度LEDワークライト

    ローベイ照明&ロボットワークセル用途向けの明るく均一で調整可能なライト。多様な取り付けオプションによる簡単な設置。
    WLS28-2汎用多用途LEDストリップライト
    WLS28-2汎用多用途LEDストリップライト

    多様な産業用途に適した21 mmの薄型でコンパクトなLEDライト。モーションセンサ付きモデル、各種レンズ および窓の選択が可能で、最大限の柔軟性を実現。
    過酷な環境用のWLS27飛散防止LEDライト
    過酷な環境用のWLS27飛散防止LEDライト

    耐薬品性のある飛散防止ハウジングに完全密閉。洗浄に対応したIP69Kに準拠。複数のカラーオプションで照明と表示の組み合わせを実現。
    WLAシリーズ LEDエリア照明
    WLAシリーズ LEDエリア照明

    広範囲を照らす高出力LEDアレイライト。レンズ付きとレンズ無しの密閉モデル、水中用の封止モデルがあります。
    技術者へのお問い合わせ
    Find a Distributor
    印刷
    マイライブラリに追加
    追加しました