Flach montierte Not-Halt-Schalter

Die bündige Halterung macht die Installation und das Anschließen einfach, da Zusammenbau, Einzelverdrahtungen oder Zusatzgehäuse nicht erforderlich sind.

  • Modelle mit In-Series Diagnostics (ISD) lieferbar, die detaillierte Status- und Leistungsdaten von jedem angeschlossenen Schalter bieten, auf die mittels HMI oder einem ähnlichen Gerät zugegriffen werden kann.
  • Der patentierte Not-Halt-Sockel blinkt bei Betätigung rot und zeigt den Aktionszustand entweder mit grüner, gelber oder keiner Beleuchtung an.
  • Einteiliger, vollständig geschlossener Taster mit M12-Anschluss reduziert den Zeit- und Arbeitsaufwand bei der Installation
  • Robustes Design mit Schutzart IP65 für den Einsatz in rauen Umgebungen.
  • Modelle mit lokalem Reset-Eingang verfügbar
  • Tasterdurchmesser, Tasterabdeckung, Auslösetyp, Beleuchtung und abschließbare Ausführungen verfügbar
  • Ausführungen mit Verriegelungsausgang erfüllen die ISO-Norm 13850 gemäß IEC 60947-5-1
  • Die Safe-Break-Funktion sorgt dafür, dass die Öffnerkontakte geöffnet werden, wenn der Kontaktblock vom Auslösegerät getrennt wird.

Die einfach zu installierenden flach montierten Not-Aus-Schalter sind in vier Ausführungen erhältlich: als Standardauslösegerät, als beleuchtetes Standardauslösegerät, als verriegelbares Auslösegerät und als beleuchtetes verriegelbares Auslösegerät.

  • Erhältlich in verschiedenen Farbausführungen. Zweifarbig: gelb-rot (oder grün-rot); einfarbig: rot; oder mit unbeleuchtetem schwarzen Sockel.
  • Robuste Bauweise der Schutzklasse IP65
  • Mit Kompatibilität für beleuchtetes Sicherheits-BUS-Gateway erhältlich
  • Ausführungen mit Verriegelungsausgang erfüllen die ISO-Norm 13850; direkter (zwangsgeführter) Öffnungsbetrieb gemäß IEC 60947-5-1
  • Die Safe-Break-Funktion sorgt dafür, dass die Öffnerkontakte geöffnet werden, wenn der Kontaktblock vom Auslösegerät getrennt wird.
  • Mehrere Taster können mit Anschlusskabelsets der CSS-Serie angeschlossen und in Reihe geschaltet werden.
  • Erfüllt die Normen ANSI B11.19, ANSI NFPA79 und IEC/EN 60204-1 für Not-Aus-Vorrichtungen.

Technische Literatur

Datum
Typ
Größe
SSA-EB1PLx-0DEx Series Lighted Emergency Stop Button with ISD
18 Oct 2023
Produkthandbuch
5.6MB
SSA-EBx-12ED1xx Series Illuminated Flush Mount Electro-Mechanical Push Buttons
12 Jul 2023
Datenblatt
1.4MB
SSA-EB1xxED1Q Series Flush Mount Emergency Stop Push Buttons
12 Jul 2023
Datenblatt
1.4MB
Datum
Typ
Größe
SSA-EB1PLx-0Dx Series Lighted Emergency Stop Button with ISD (French)
03/07/22
Produkthandbuch
975K
Datum
Typ
Größe
SSA-EB1PLx-0Dx Series Lighted Emergency Stop Button with ISD (German)
03/07/22
Produkthandbuch
977K
Datum
Typ
Größe
SSA-EB1PLx-0Dx Series Lighted Emergency Stop Button with ISD (Italian)
03/07/22
Produkthandbuch
968K

Broschüren und Kataloge

Datum
Typ
Größe
Banner In-Series Diagnostics Overview Flyer
23 May 2025
Produktbroschüre
373K
Banner In-Series Diagnostics Brochure
23 May 2025
Produktbroschüre
2MB
Safety Solutions Brochure
Safety Solutions Brochure
8 Apr 2025
Produktbroschüre
11.4MB
Datum
Typ
Größe
CN_Safety Solutions Brochure
安全解决方案
06/09/23
Produktbroschüre
14.8MB
Datum
Typ
Größe
Banner In-Series Diagnostics Sellsheet
04/14/21
Produktbroschüre
969K
Datum
Typ
Größe
Banner In-Series Diagnostics Sellsheet
12/04/20
Produktbroschüre
1.7MB
Datum
Typ
Größe
Banner In-Series Diagnostics Sellsheet
04/14/21
Produktbroschüre
966K
Datum
Typ
Größe
Banner In-Series Diagnostics Flyer
09/21/20
Produktbroschüre
1.8MB
  • In-Series Diagnostics

    In-Series Diagnostics

    In-Series Diagnostics (ISD) makes it easy to access diagnostic data from devices in a safety system without special equipment or designated cabling. Users can troubleshoot machine safety systems, prevent system faults, and reduce equipment downtime.

Produktauswahl

Wird geladen...

Suchergebnisse einschränken

Alle Filter löschen

Empfohlene Produkte

  • (1)

In-Series Diagnostics

  • (43)
  • (7)

Connection Type

  • (1)
  • (47)
  • (3)

Illuminated

  • (37)

Illumination Type

  • (32)
  • (5)

Armed Color (Solid)

  • (1)
  • (9)
  • (19)
  • (8)

Actuated Color

  • (12)
  • (25)

Release Method

  • (19)
  • (32)

Lockable

  • (12)

Button Diameter (mm)

  • (36)
  • (12)
  • (3)

Button Shroud

  • (46)
  • (5)
Alle anzeigen Weniger anzeigen
Ausgewählte Filter
  1. SSA-EB1PLGR-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Green, Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD

  2. SSA-EB1P-02ED1Q4

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    40 mm Actuator
    IP65; Contacts: 2NC; 4-pin M12 QD

  3. SSA-EB1PLXR-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mount 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD

  4. SSA-EB1PL2-12ED1Q8

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Illuminated (PUSH ON) 40 mm Actuator
    IP65; Contacts: 2NC/1 NO; 8-pin M12 QD

  5. SSA-EB1PLYR-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Yellow, Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD

  6. SSA-EB1MLGRP-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mounting 44 mm Lockable Push Button
    Environ. Rating: IP65; Lighted; Color: Green, Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD

  7. SSA-EB1PL-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Red Solid
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD

  8. SSA-EB1PLGR-0DED1Q8

    logo with r symbol

    Emergency Stop with ISD: Flush Mount 40 mm Push Button
    Illuminated Color: Green/Red Flashing
    2 N.C. OSSD Safety Contacts, IP65
    8-pin M12 QD

  9. SSA-EB1PLXR-0DED1Q8

    logo with r symbol

    Emergency Stop with ISD: Flush Mount 40 mm Push Button
    Illuminated Color: Off/Red Flashing
    2 N.C. OSSD Safety Contacts, IP65
    8-pin M12 QD

  10. SSA-EB1MP-02ED1Q5B

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Lockable 44 mm Actuator
    IP65; Contacts: 2NC; 5-pin M12 Integral QD
    Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5

  11. SSA-EB1PL-02ED1Q5B

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Red Solid
    2 N.C. Safety Contacts; Siemens ET200Pro
    5-pin M12 QD

  12. SSA-EB1PLXR-02ED1Q5A

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Red Flashing
    2 N.C. Safety Contacts; AB ArmorBlock
    5-pin M12 QD

  13. SSA-EB1P-22ED1Q8

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    40 mm Actuator
    IP65; Contacts: 2NC/2NO; 8-pin M12 Integral QD

  14. SSA-EB2P-02ED1Q5B

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    60 mm Actuator
    IP65; Contacts: 2NC; 5-pin M12 QD
    Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5

  15. SSA-EB1PLGR-12ED1

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Green, Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. Aux. Contacts
    Terminal Strip

  16. SSA-EB1P-02ED1Q5B

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    40 mm Actuator
    IP65; Contacts: 2NC; 5-pin M12 Integral QD
    Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5

  17. SSA-EB1P-02ED1Q5A

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    40 mm Actuator
    IP65; Contacts: 2NC; 5-pin M12 QD
    Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5

  18. SSA-EB1PL2-12EB1Q12K50

    logo with r symbol

    Illuminated E-Stop Button (Push On): 2 NC/1 NO
    E-Stop Legend
    3 Color K50 Touch, BENC Enclosure
    12-pin M12 Integral QD

  19. SSA-EB1PL-12ED1

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environmental Rating: IP65; Lighted; Color: Red Solid
    2 N.C. Safety Contacts; 1 N.O. Aux. Contacts
    Terminal Strip

  20. SSA-EB1PL-02ED1Q5A

    logo with r symbol

    Emergency Stop: Flush Mount 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Red Solid
    2 N.C. Safety Contacts; AB ArmorBlock
    5-pin M12 QD

  21. SSA-EB1PLGRS1-0DED1Q8

    logo with r symbol

    Emergency Stop with ISD: Flush Mount 40 mm Push Button
    Illuminated Color: Green/Red Flashing
    2 N.C. OSSD Safety Contacts, IP65
    8-pin M12 QD
    ESC-1-YW Button Shroud Installed

  22. SSA-EB1PLXRS1-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mount 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD
    ESC-1-YW Button Shroud Installed

  23. SSA-EB1PLYR-12ED1

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Yellow, Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    SPRF 23331

  24. SSA-EB1ML2P-12ED1Q8

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Lockable Illuminated (PUSH ON) 44 mm Actuator
    IP65; Contacts: 2NC/1 NO; 8-pin M12 Integral QD

  25. SSA-EB1MP-02ED1

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Lockable 44 mm Actuator
    IP65; Contacts: 2NC; Cable Gland 1/2-14NPT

  26. SSA-EB1MP-02ED1Q4

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Lockable 44 mm Actuator
    IP65; Contacts: 2NC; 4-pin M12 Integral QD

  27. SSA-EB1P-11ED1Q4

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    40 mm Actuator
    IP65; Contacts: 1NC/1 NO; 4-pin M12 QD

  28. SSA-EB1PL-0DED1Q8

    logo with r symbol

    Emergency Stop with ISD: Flush Mounting 40 mm Push Button
    Illuminated Color: OFF/Red Solid
    2 N.C. OSSD Safety Contacts, IP65
    8-pin M12 QD

  29. SSA-EB1PL2S1-12ED1Q8

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Illuminated (PUSH ON) 40 mm Actuator
    IP65; Contacts: 2NC/1 NO; 8-pin M12 QD with shroud style 1 installed

  30. SSA-EB1PLYR-02ED1Q5A

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Yellow, Red Flashing
    2 N.C. Safety Contacts; AB ArmorBlock
    5-pin M12 QD

  31. SSA-EB1MLXRP-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mount 44 mm Lockable Push Button
    Environ. Rating: IP65; Lighted; Color: Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD

  32. SSA-EB1PL2-12EB1Q12K50LT

    logo with r symbol

    Illuminated E-Stop Button (Push On): 2 NC/1 NO
    E-Stop Legend
    3 Color K50 Touch, BENC Enclosure
    12-pin M12 Integral QD Left Cable

  33. SSA-EB1PLGR-0DED1Q8R

    logo with r symbol

    Emergency Stop with ISD: Flush Mount 40 mm Push Button
    Illuminated Color: Green/Red Flashing
    2 N.C. OSSD Safety Contacts, IP65
    8-pin M12 QD
    Local Reset Input

  34. SSA-EB1PLXR-02ED1Q5B

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Red Flashing
    2 N.C. Safety Contacts; Siemens ET200Pro
    5-pin M12 QD

  35. SSA-EB1PLXR-0DED1Q8R

    logo with r symbol

    Emergency Stop with ISD: Flush Mount 40 mm Push Button
    Illuminated Color: Off/Red Flashing
    2 N.C. OSSD Safety Contacts, IP65
    8-pin M12 QD
    Local Reset Input

  36. SSA-EB1MLP-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mounting 44 mm Lockable Push Button
    Environ. Rating: IP65; Lighted; Color: Red Solid
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD

  37. SSA-EB1MLYRP-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mounting 44 mm Lockable Push Button
    Environ. Rating: IP65; Lighted; Color: Yellow, Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD

  38. SSA-EB1MP-22ED1Q8

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Lockable 44 mm Actuator
    IP65; Contacts: 2NC/2NO; 8-pin M12 Integral QD

  39. SSA-EB1P-02ED1Q4A

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    40 mm Actuator
    IP65; Contacts: 2NC; 4-pin M12 Integral QD
    CH1=pins1&3 CH2=pins2&4

  40. SSA-EB1PLGR-02ED1Q5A

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Green, Red Flashing
    2 N.C. Safety Contacts; AB ArmorBlock
    5-pin M12 QD

  41. SSA-EB1PLGRS1-02ED1Q5A

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Green, Red Flashing
    2 N.C. Safety Contacts; AB ArmorBlock
    5-pin M12 QD
    ESC-1-YW Button Shroud Installed

  42. SSA-EB1PLYR-0DED1Q8

    logo with r symbol

    Emergency Stop with ISD: Flush Mount 40 mm Push Button
    Illuminated Color: Yellow/Red Flashing
    2 N.C. OSSD Safety Contacts, IP65
    8-pin M12 QD

  43. SSA-EB2P-04ED1Q8

    logo with r symbol

    SSA-EB2 Flush-mount Emergency Stop Push Button
    60 mm Actuator
    IP65; Contacts: 4NC; 8-pin M12 Integral QD

  44. SSA-EB2PLXR-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mount 60 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Red Solid/Flashing
    2 N.C. Safety Contacts; 1 N.O. aux.
    8-pin M12 QD

  45. SSA-EB1MLYRP-02ED1Q5A-SP

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Yellow, Red Flash Illuminated Base; Lockable 44 mm Actuator
    IP65; 2 N.C. Safety Contacts; 1 N.O. aux. Contact; 5-pin M12 Integral QD
    Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5

  46. SSA-EB1MP-02ED1Q5A

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Lockable 44 mm Actuator
    IP65; Contacts: 2NC; 5-pin M12 Integral QD
    Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5

  47. SSA-EB1MP-11ED1Q4

    logo with r symbol

    SSA-EB1 Flush-mount Emergency Stop Push Button
    Lockable 44 mm Actuator
    IP65; Contacts: 1NC/1 NO; 5-pin M12 Integral QD

  48. SSA-EB1PLGR-02ED1Q5B

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Green, Red Flashing
    2 N.C. Safety Contacts; Siemens ET200Pro
    5-pin M12 QD

  49. SSA-EB1PLS1-12ED1Q8

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Red Solid
    2 N.C. Safety Contacts; 1 N.O. aux. Contacts
    8-pin M12 QD
    ESC-1-YW Button Shroud Installed

  50. SSA-EB1PLYR-02ED1Q5B

    logo with r symbol

    Emergency Stop: Flush Mounting 40 mm Push Button
    Environ. Rating: IP65; Lighted; Color: Yellow, Red Flashing
    2 N.C. Safety Contacts; Siemens ET200Pro
    5-pin M12 QD

  51. SSA-EB1PLYR-0DED1Q8R

    logo with r symbol

    Emergency Stop with ISD: Flush Mount 40 mm Push Button
    Illuminated Color: Yellow/Red Flashing
    2 N.C. OSSD Safety Contacts, IP65
    8-pin M12 QD
    Local Reset Input

Zu Meine Bibliothek hinzufügen
Hinzugefügt