All Work Station Solutions

  1. • Fertige Paletten schnell aus Montagestationen entfernen • Direktkommunikation von Montagestationen mit FTS ermöglichen • Effizientere Prozesse anhand von Durchsatzdaten für

  2. K50 Pro Taster mit Display und Kommunikation der Taktzeiten über IO-Link innerhalb der Sichtlinien der Arbeiter für Montageprozesse innerhalb der Zeitvorgaben und die Einhaltung der Produktionsziele.

  3. ABR Series barcode readers can be used to solve track and trace applications, offering increased resolution to read smaller codes, over a larger target area, and at greater distances. Polarization is now available in both 1.3 MP and 2 MP ABR 7000 models for improved performance on targets with reflective surfaces or where glare is present. Our highest resolution camera, the VE is also available in only-barcode reading models, as well as the original vision camera-only model. This makes our VE series is the highest-resolution barcode reader in our portfolio, designed to better solve complex applications.

  4. Several technologies and solutions are available for bin-picking applications for error-proofing processes. Light arrays prompt the operator for part selection with integral job lights, then reliably sense retrieval of the part, using an array of visible red or infrared sensing beams located in front of the bin.

  5. Um das Fehlerrisiko bei Montagevorgängen zu reduzieren, wird ein einteiliger EZ-LIGHT-PVD-Bestückungssensor auf der obersten Leiste eines Regals angebracht, der auf die Regalöffnung ausgerichtet ist. Der PVD ist mit einem Prozess-Controller verbunden, der für die Beleuchtung des PVD am jeweiligen Entnahmebehälter programmiert ist. Nachdem der PVD erkennt, dass die Hand des Mitarbeiters in den Behälter gegriffen hat und wieder heraus gezogen wurde, signalisiert der Controller dem PVD des nächsten Behälters aufzuleuchten.

  6. To reduce the risk of error in an assembly operation, a one-piece EZ-LIGHT PVD pick-to-light sensor with a 400 mm range is interfaced with a process controller programmed with the correct assembly sequence. The controller makes the PVDs light up in the correct order, to show the assembler which part to pick. After the PVD detects that the assembler's hand has entered and left the bin, the controller signals the PVD of the next bin in the pick sequence to light up.

  7. In einem Buchverpackungslager ist das Regal über jedem Karton mit einem einteiligen EZ-LIGHT PVD Pick-to-Light Sensor ausgestattet. Ein Arbeiter erfüllt Aufträge durch Auswahl der Menge des jeweiligen Buches, die auf dem Packzettel angegeben ist. Damit der Arbeiter die Kartons, aus denen er die Bücher herausnehmen soll, leichter auffinden kann, sind die PVD-Sensoren über den Kartons beleuchtet. Der PVD-Sensor erfasst die Hand des Arbeiters im Karton und überprüft, ob das Buch herausgenommen wurde.

  8. Banner’s WLB32 Industrial Light Bar is ideal for workstations. With a Hi/Lo/Off switch, operators are able to control the lighting level and are able to switch the LED light bar off when they are done. The WLB32 provides workers high brightness with even light output and enables numerous tasks in a workstation, including working on a computer.

Zu Meine Bibliothek hinzufügen
Hinzugefügt